Danby DPAC 13009 Power Supply, Cord, Energy-Saving, Internal Safety Feature, Tips

Page 5
• Under no circumstances should this device be used to turn the unit on or off.
• The “RESET” button must always be pushed in (engaged) for correct operation.
• The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

IMPORTANT SAFETY INFORMATION

POWER SUPPLY

The power cord supplied with this air conditioner contains a device

CORD

that senses damage to the power cord. To test if your power cord is

working properly, you must do the following:

1) Connect the power supply cord to an

NOTE: The power cord supplied with this air

electrical outlet.

 

conditioner contains a current leakage detection

 

 

device designed to reduce the risk of fire. In the

2) The power supply cord has two buttons

event the power supply cord is damaged, it cannot

located on the head of the plug. One button is be repaired and must be replaced with a new cord

marked “TEST”, and the other is marked

from the product manufacturer.

“RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3)Press the “RESET” button; you will hear a

click as the button engages.

4)The power supply cord is now energized

and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head).

ENERGY-SAVING

Your Danby appliance is designed to be highly efficient in energy

TIPS

savings. Follow these recommendations for greater efficiency.

 

 

1)Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2)The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times.

3)Use drapes, curtains or shades to keep direct sunlight from penetrating and heating room, but do not allow drapes or curtains to obstruct the air flow around the unit.

4)Start your air conditioner before the

outdoor air becomes hot and uncomfortable, to avoid an initial period of discomfort while the unit is cooling off the room. Use of the automatic start/stop programmable TIMER feature can be a major asset in this regard if utilized to the fullest extent.

5)When outdoor temperatures are cool enough, turn the air conditioner off and use the FAN MODE on HIGH, MED, or LOW. This circulates indoor air, providing some cooling comfort while utilizing less electricity.

INTERNAL SAFETY

FEATURE

This unit is equipped with a fail-safe switch mechanism that prevents the unit from condensing water in the event the internal reservoir becomes full or is accidentally displaced. If this situation occurs, the (RED) WATER FULL indicator light will illuminate. This condition will remain steady until the external water tank is emptied.

NOTE: No cooling will occur until the internal tank is emptied and/or re-positioned. It may take several minutes before the compressor resumes normal operation.

CAUTION: During air conditioning and dehumidifier mode, if the compressor cycle is interrupted (water full condition, unplugged, power failure, etc.) and reinstated immediately thereafter (within 3-5 minutes), a compressor protection circuit is automatically activated. The compressor cannot operate during compressor protection mode (this is normal). It may take 3-5 minutes before the protection circuit self-deactivates.

DO NOT ATTEMPT TO START THE UNIT (COMPRESSOR) DURING THIS PERIOD.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Dpac Table of Contents Unit Specifications Part Identification Important Safety InformationElectrical Specifications Internal Safety Feature Power SupplyCord ENERGY-SAVINGDraining Excess Water Operating InstructionsWindow KIT Installation InstallationLCD Display Remote ControlEmergency On / OFF Switch Auto AIR ConditioningFAN DehumidifierFilter Cleaning Indicator Clock TimerDefault Indicator Full IndicatorCleaning Care and MaintenanceUnit AIR FilterProblem Possible Cause TroubleshootingSoins ET Entretien Table DES MatiéresSpécifications DE L’UNITÉ Identification DE Partie Spécifications DE L’UNITÉ BienvenueConsignes DE Sécurité Important Identification DE PartiesSpécifications Electrique TableauDE Sécurité Suggestions Pour’ECONOMIE DE ’ENERGIELexès Deau Consignes DE UtilisationVidange DE Mode Climatisation Seulement Installation DU KIT DE FenêtreTélécommande Fonctionnement -Caractéristique du Panneau de CommandeClimatiseur FonctionnementVentilateur Fonctionnement suiteMinuterie Automatique DE L’UNITÉ Filtres À AIRNettoyage Dépannage DPAC13009

DPAC 13009 specifications

The Danby DPAC 13009 is a portable air conditioner designed for optimal cooling in residential settings. With a sleek and compact design, it offers a stylish solution for adapting to changing climates while maintaining comfort indoors. The unit has a cooling capacity of 13,000 BTU, making it suitable for spaces up to approximately 500 square feet, which is perfect for medium-sized rooms, such as living rooms, bedrooms, and home offices.

One of the standout features of the DPAC 13009 is its three-in-one functionality, which allows it to operate not just as an air conditioner but also as a dehumidifier and a fan. This versatility enables users to create the desired indoor environment, whether it’s battling humidity during the summer months or simply circulating air for better ventilation. The dual hose design optimizes cooling performance and energy efficiency, reducing the time taken to reach the desired temperature while minimizing the load on the unit.

Energy efficiency is a critical aspect of the Danby DPAC 13009, as it comes with an Energy Efficiency Ratio (EER) rating, helping to save on energy bills while also being environmentally friendly. This is enhanced by its programmable timer and energy-saving mode, allowing users to set the unit to operate only when needed. The air conditioner’s remote control provides added convenience, enabling users to adjust settings from across the room.

The Danby DPAC 13009 is also equipped with an easy-to-use control panel featuring digital LED display, making it straightforward for anyone to operate. Users can easily switch between different cooling modes, fan speeds, and set the thermostat to their preferred temperature. For those who prioritize a quiet environment, this model operates at a relatively low noise level, ensuring that sleep or important activities are not disturbed.

In addition, the unit features a washable air filter, which helps to maintain clean air quality and prolong the life of the air conditioning system. Regular maintenance is simplified with this removable filter, ensuring that users can keep their air conditioner running optimally.

With its combination of features, technology, and ease of use, the Danby DPAC 13009 is a robust choice for anyone looking to enhance their indoor comfort levels while enjoying the benefits of a portable air conditioning system. Its stylish design, efficient functionality, and user-friendly controls make it an ideal solution for seasonal climate changes.
Top Page Image Contents