Danby DPAC 13009 operating instructions AIR Conditioning, Auto

Fig. A

	OPERATING INSTRUCTIONS
		IMPORTANT: The exhaust hose must be properly vented (outdoors)
AIR CONDITIONING
		during air conditioning mode.

1)Press the POWER SWITCH key (Fig. A) to switch on the unit, and the previous set temperature will be shown in the temperature display area of the control panel.

2)Press the MODE key (Fig. B) until the COOL indicator light illuminates on the control panel (Fig.C). Each depression of the MODE key will advance to a different mode setting (Cool- Dehumidifier-Fan-Auto)

3)Press the appropriate (UP) or (DOWN) buttons (Fig. D1 & D2) to select a suitable operating temperature setting. Temperature settings are adjustable between 18°C (64°F) to 32°C (89°F).

4)Press the FAN key (Fig. E) to select the desired fan speed setting (Auto-High-Med.-Low). Your selection will appear on the control panel (each depression of the fan key will advance to a different setting).

5)When the cooling mode is activated, the transparent ring around the button on the front of the device (Fig. G) emits a BLUE light.

• Cooling stops automatically when the set temperature is achieved. Cooling resumes when the room temp. rises above the “set” temperature level.

Fig. B

Fig. C

Fig. D1

Fig. D2

Fig. E

Fig. F

Auto

High

Med.

Low

Fig. G

Cooling Mode (blue)

AUTO

With unit running in AUTO mode (Fig. V), the machine will operate according to the ambient temperature, and will change its operational type and fan speed automatically:

Cooling Mode: When temperature is above 25°C (77°F)

Dehumidifier Mode: When temperature is between 18°C (64°F) and 25°C (77°F).

1)After setting mode to AUTO, the unit will test the environmental temperature during the first 3 seconds. Then it will decide which mode to automatically operate in.

2)Fan speed will change automatically according to ambient temperature.

Fig. U

Heating mode (red)

8