Integra CNP-1000 Positioning the XM Mini-Tuner System, Buttons to select 3. Satellite

Page 6

Tuning / Enter

3

Use the Up and Down [ ]/[ ]

 

 

buttons to select “3. Satellite

 

 

Radio,” and then press [Enter].

 

 

The Satellite Radio menu appears.

Setup

Positioning the XM Mini-Tuner System

You can check the signal strength of the XM radio signal and adjust the position of the XM Mini-Tuner System accordingly.

1On the AV receiver, press the [Setup] button.

 

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]

buttons to select “4. Source Setup,” and then press [Enter]. The Source Setup menu appears.

4. Source Setup

TUNER

1.IntelliVolume

2.A/V Sync

3. Satellite Radio

4-3. Satellite Radio

XM Antenna Aiming

SatelliteTerrestrial

Adjust the position of the XM Mini-Tuner Antenna so that the SAT/TER signal strength bar is as long as possible.

The best signal is achieved when the antenna is pointing to the southern sky through an unobstructed window. Terrestrial (TER) signals are only avail- able in certain areas.

So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial reception.

6

Image 6
Contents Connecting the XM Mini-Tuner and Home Dock Important XM Radio InformationSetting the Satellite Radio Mode Selecting XM Satellite RadioSigning Up for XM Satellite Radio Selecting XM Radio Channels Press the Receiver button, fol- lowed by the D TUN buttonTo listen to the previously Selected XM channel, pressReturn button Presetting XM Channels Displaying XM Radio InformationRadio, and then press Enter Positioning the XM Mini-Tuner SystemButtons to select 3. Satellite Satellite Radio menu appearsXM Radio Messages XM Listener Care phone number