Integra CNP-1000 instruction manual Presetting XM Channels, Displaying XM Radio Information

Page 5

Presetting XM Channels

You can store a combination of up to 40 of your favorite XM channels and AM/FM radio stations as presets.

Displaying XM Radio Information

1Press the [Display] button

1Tune into the XM channel that you want to store as a preset.

2Press the [Memory] button.

The preset number flashes.

3While the preset number is flash-

AV receiver

Remote

controller

repeatedly to cycle through the available information.

ing (about 8 seconds), use the Preset []/[ ] buttons to select a preset from 1 through 40.

4Press the [Memory] button again to store the channel.

The channel is stored and the preset number stops flashing.

Repeat this procedure for all of your favorite XM channels.

Selecting Presets

1

 

 

To select a preset, use the Preset

 

 

 

 

 

 

[ ]/[ ] buttons, or the remote

 

 

 

controller’s CH [+/–] button.

 

 

 

 

 

 

 

 

Deleting Presets

1 Select the preset that you want to delete.

See the previous section.

2While holding down the [Mem-

ory] button, press the [Tuning Mode] button.

The preset is deleted and its number disappears from the display.

The following information can be displayed:

Channel name

Channel number & preset number

Category

Artist

Song title

Listening mode

Note:

If the category, artist, or song title is not available, “- - -” will be displayed instead.

5

Image 5
Contents Important XM Radio Information Connecting the XM Mini-Tuner and Home DockSigning Up for XM Satellite Radio Setting the Satellite Radio ModeSelecting XM Satellite Radio Press the Receiver button, fol- lowed by the D TUN button Selecting XM Radio ChannelsReturn button To listen to the previouslySelected XM channel, press Displaying XM Radio Information Presetting XM ChannelsButtons to select 3. Satellite Positioning the XM Mini-Tuner SystemRadio, and then press Enter Satellite Radio menu appearsXM Listener Care phone number XM Radio Messages