ADTRAN 610200094 manual Resetting Mirroring Indicators

Page 15

Adtron I35MB Operations Manual

12.Before the disk drive is fully seated (approximately ¼ of an inch to the drive being fully seated) re-attach the flex cable to the disk drive. Refer to Figure 10 for a view of this procedure. Carefully align and slowly attach. Pay close attention to mounting the flex cable. Ignoring this procedure and caution can lead to damage in future operations.

13.Tighten the retaining screw for the new disk drive.

14.The I35MB may be re-inserted in the disk drive bay, as described in Inserting the I35MB on page 5 of this document. If your computer system does not provide front access to the I35MB when it is installed in the bay, then connect the I35MB to the primary or secondary ports on the IDE controller and power cable external to the computer system to do the rebuild. The front LEDs and buttons must be available to do the rebuild.

15.After securing the I35MB, a rebuild must be performed. Go to Rebuilding a Bank on page 13.

„

Resetting Mirroring Indicators

The procedure below provides steps to reset the mirror indicators on the I35MB. These steps address mirror indicators and DO NOT address resetting mirroring data or data equilibrium. In addition, following these steps will only ensure subsequent writes will be mirrored. For more information on resetting mirroring operations beyond mirror indicators, refer to the section of this manual titled, Rebuilding a Bank, on page 13.

Static Sensitive - The I35MB is a static sensitive device. Take precautions to ensure that static does not discharge into the I35MB.

To reset mirror operations and change both banks:

1.While power is OFF, verify both banks are unpopulated.

2.Cycle the I35MB power to the ON state (for 5 seconds or more), then the OFF state.

3.Insert media into desired banks.

4.Cycle power ON.

5.Once powered ON, all subsequent writes will be mirrored.

„

12

Rev. 003, PN: 610200094

Page 14 Page 16
Image 15
Page 14 Page 16
Contents March Rev I35MB Mirrored Hard Disk Operations ManualESD Warning Idle State No host access Active State Host access Aborting a button pressA.R.T Attribute Notes Introduction I35MB FeaturesRelated Documents I35MB Jumper SettingsSetting a Remote-Mounted Activity LED Setting Master/Slave and Cable SelectInterface Connectors I35MB InstallationIntroduction Mounting Holes Inserting the I35MBPartitioning and Formatting Operating System InstallationBasic Operation Removing the I35MBLEDs and Mirror controls I35MB LEDs and Mirror Control ButtonsManaging Faults Advanced OperationsMirror Control Button Functions Bank Soft Faults Bank Hard FaultsChanging Media Turning the Buzzer OffFlex Cables Resetting Mirroring Indicators Using Different Size Media Rebuilding a bankRebuilding a Bank Off-line Examples I35MB Rail Kit Using the I35MB Rail KitAttribute #113 Rebuild Activity Completion A.R.T Attribute Table Name Value Idle State No host access LED IndicatorsGreen OFF Orange 25.3 101.6 I35MB Dimension DrawingsAppendix Sales and Technical Support Standard WarrantyRevision Control

610200094 specifications

ADTRAN 610200094 is a versatile networking device designed to enhance connectivity and improve communication networks. This product belongs to the ADTRAN family, a well-known name in telecommunication and networking solutions. The 610200094 model focuses on providing reliable and efficient service that meets the demands of modern network environments.

One of the main features of the ADTRAN 610200094 is its robust performance. It is engineered to support various types of connections, enabling seamless data transfer across different platforms. With its multi-port capability, the device can easily manage multiple connections, making it ideal for enterprises that require high bandwidth and fast connectivity.

Another significant characteristic of the ADTRAN 610200094 is its support for advanced technologies such as Ethernet over Copper (EoC) and T1/E1. This versatility allows for greater flexibility in deployment, accommodating various existing infrastructure setups without the need for substantial upgrades or changes. Moreover, the ability to support both symmetrical and asymmetrical bandwidth options caters to a wide range of applications, from voice to video to data services.

The device also integrates quality of service (QoS) features, which prioritizes different types of traffic to ensure that critical applications receive the necessary bandwidth for optimal performance. This is particularly valuable for businesses that rely on real-time communications, such as VoIP or video conferencing, where delay or packet loss can significantly impact productivity.

Security is another crucial aspect of the ADTRAN 610200094. It includes built-in firewall capabilities that protect the network from external threats and unauthorized access. This security feature is essential for businesses that handle sensitive information, ensuring that data integrity and confidentiality are maintained.

In terms of manageability, the ADTRAN 610200094 supports various management protocols, allowing IT administrators to easily monitor and configure the device according to their specific needs. This feature streamlines network management processes, contributing to an efficient overall network operation.

In conclusion, the ADTRAN 610200094 stands out as a premium solution for businesses seeking to enhance their communication systems. With its comprehensive features, support for modern technologies, and robust security measures, this device is well-equipped to handle the demands of today's digital age, making it a valuable asset for any organization.
Top Page Image Contents