ADTRAN 610200094 manual Using the I35MB Rail Kit

Page 18

Adtron I35MB Operations Manual

Using the I35MB Rail Kit

The following steps describe the process to disassemble and reassemble hard disk drives on the I35MB. Attention to individual instructions is necessary to ensure functionality and avoid damage to the device. Please contact Adtron Sales if assembling hard disk drives other than those provided by Adtron, and refer to the section of this manual titled, Using Different Size Media. Refer to Appendix # 1 for a list of supplies that are included with the I35MB Rail Kit Installation.

Static Sensitive - The I35MB is a static sensitive device. Take precautions to ensure that static does not discharge into the I35MB.

1.Position rail retention screw (#1) through left rail (#2), align screw with corresponding hard disk, bottom side mounting hole and screw gently into place (avoid tightening screw until second retention screw is also aligned and screwed into place). Firmly tighten both screws but do not over tighten.

2.Repeat assembly sequence from step 1, with the right rail (# 3). Align the drive assembly retention screw (# 4) with the left rail (# 2) as illustrated and screw gently into place. Avoid tightening the drive assembly screw until step 4.

3.Adhere chassis ground protection barrier1 (# 5) to the rear edge of the drive.

4.Align the completed hard disk drive assembly on the I35MB guide rails and slide into place. Attach the drive power and signal flex cable, which will require pulling the drive slightly out to accommodate assembly. Lastly, gently tighten the drive assembly retention screw into place, ensuring drive does not extend beyond the I35MB footprint, then firmly tighten the screw. Refer to Changing Media, on page 10, for detailed instructions for attaching flex cables and connecting the hard disk drive.

3

1

2

4

5

Figure 11 I35MB Rail Kit

1Important: Should a drive be replaced and a new drive assembled with the original I35MB Rail Kit, a new chassis ground protection material will be required. For example, Adtron suggests Kapton tape.

15

Rev. 003, PN: 610200094

Page 17 Page 19
Image 18
Page 17 Page 19
Contents I35MB Mirrored Hard Disk Operations Manual March RevESD Warning Idle State No host access Active State Host access Aborting a button pressA.R.T Attribute Notes I35MB Features IntroductionI35MB Jumper Settings Related DocumentsSetting Master/Slave and Cable Select Setting a Remote-Mounted Activity LEDInterface Connectors I35MB InstallationIntroduction Inserting the I35MB Mounting HolesRemoving the I35MB Operating System InstallationBasic Operation Partitioning and FormattingI35MB LEDs and Mirror Control Buttons LEDs and Mirror controlsManaging Faults Advanced OperationsMirror Control Button Functions Bank Hard Faults Bank Soft FaultsTurning the Buzzer Off Changing MediaFlex Cables Resetting Mirroring Indicators Using Different Size Media Rebuilding a bankRebuilding a Bank Off-line Examples Using the I35MB Rail Kit I35MB Rail KitAttribute #113 Rebuild Activity Completion A.R.T Attribute Table Name Value LED Indicators Idle State No host accessGreen OFF Orange I35MB Dimension Drawings 25.3 101.6Appendix Standard Warranty Sales and Technical SupportRevision Control

610200094 specifications

ADTRAN 610200094 is a versatile networking device designed to enhance connectivity and improve communication networks. This product belongs to the ADTRAN family, a well-known name in telecommunication and networking solutions. The 610200094 model focuses on providing reliable and efficient service that meets the demands of modern network environments.

One of the main features of the ADTRAN 610200094 is its robust performance. It is engineered to support various types of connections, enabling seamless data transfer across different platforms. With its multi-port capability, the device can easily manage multiple connections, making it ideal for enterprises that require high bandwidth and fast connectivity.

Another significant characteristic of the ADTRAN 610200094 is its support for advanced technologies such as Ethernet over Copper (EoC) and T1/E1. This versatility allows for greater flexibility in deployment, accommodating various existing infrastructure setups without the need for substantial upgrades or changes. Moreover, the ability to support both symmetrical and asymmetrical bandwidth options caters to a wide range of applications, from voice to video to data services.

The device also integrates quality of service (QoS) features, which prioritizes different types of traffic to ensure that critical applications receive the necessary bandwidth for optimal performance. This is particularly valuable for businesses that rely on real-time communications, such as VoIP or video conferencing, where delay or packet loss can significantly impact productivity.

Security is another crucial aspect of the ADTRAN 610200094. It includes built-in firewall capabilities that protect the network from external threats and unauthorized access. This security feature is essential for businesses that handle sensitive information, ensuring that data integrity and confidentiality are maintained.

In terms of manageability, the ADTRAN 610200094 supports various management protocols, allowing IT administrators to easily monitor and configure the device according to their specific needs. This feature streamlines network management processes, contributing to an efficient overall network operation.

In conclusion, the ADTRAN 610200094 stands out as a premium solution for businesses seeking to enhance their communication systems. With its comprehensive features, support for modern technologies, and robust security measures, this device is well-equipped to handle the demands of today's digital age, making it a valuable asset for any organization.
Top Page Image Contents