ADTRAN 610200094 manual Advanced Operations, Mirror Control Button Functions, Managing Faults

Page 11

Adtron I35MB Operations Manual

Mirror Control Button Functions

The following figure shows the location of the mirror control buttons and LEDs on the I35MB.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Buzzer Reset

Bank 1 Mirror control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bank 0 Mirror control

Figure 8 Mirror Control Button operations

The following table describes the different operations using the Mirror Control button on either bank. Press and hold Mirror Control button to activate the functions listed in Table 2.

Button Press Duration

Bank Access LED Feedback

Function

 

 

 

 

0

– 5 seconds

LED flashes slow (1/sec)

Power up or down bank

5

– 10 seconds

LED flashes medium (2/sec)

Mirror Rebuild

10 – 15 seconds

LED flashes fast (4/sec)

No Operation

15 – 20 seconds

LED solid on

Reserved

> 20 seconds

LED off

No Operation

Table 2 Mirror Control Button operations

Functions marked reserved are for Adtron factory use only. Contact technical support for more details. In the case of a button press duration that reaches 15 seconds, DO NOT release until after 20 seconds to save future operations.

Advanced Operations

The individual banks may be taken off-line (powered down and/or replaced) at any time, for preventative maintenance or due to a failure. However, taking a bank offline automatically faults the mirror, requiring a rebuild. To clear a hard or soft fault, the rebuild must complete.

Managing Faults

The I35MB has two fault indicators: hard and soft. Refer to page 19, for the specific bank fault LED indicators to interpret these two types of faults.

8

Rev. 003, PN: 610200094

Image 11
Contents March Rev I35MB Mirrored Hard Disk Operations ManualESD Warning A.R.T Attribute Notes Idle State No host access Active State Host accessAborting a button press Introduction I35MB FeaturesRelated Documents I35MB Jumper SettingsSetting a Remote-Mounted Activity LED Setting Master/Slave and Cable SelectIntroduction Interface ConnectorsI35MB Installation Mounting Holes Inserting the I35MBPartitioning and Formatting Operating System InstallationBasic Operation Removing the I35MBLEDs and Mirror controls I35MB LEDs and Mirror Control ButtonsMirror Control Button Functions Managing FaultsAdvanced Operations Bank Soft Faults Bank Hard FaultsChanging Media Turning the Buzzer OffFlex Cables Resetting Mirroring Indicators Rebuilding a Bank Off-line Using Different Size MediaRebuilding a bank Examples I35MB Rail Kit Using the I35MB Rail KitAttribute #113 Rebuild Activity Completion A.R.T Attribute Table Name Value Idle State No host access LED IndicatorsGreen OFF Orange 25.3 101.6 I35MB Dimension DrawingsAppendix Sales and Technical Support Standard WarrantyRevision Control

610200094 specifications

ADTRAN 610200094 is a versatile networking device designed to enhance connectivity and improve communication networks. This product belongs to the ADTRAN family, a well-known name in telecommunication and networking solutions. The 610200094 model focuses on providing reliable and efficient service that meets the demands of modern network environments.

One of the main features of the ADTRAN 610200094 is its robust performance. It is engineered to support various types of connections, enabling seamless data transfer across different platforms. With its multi-port capability, the device can easily manage multiple connections, making it ideal for enterprises that require high bandwidth and fast connectivity.

Another significant characteristic of the ADTRAN 610200094 is its support for advanced technologies such as Ethernet over Copper (EoC) and T1/E1. This versatility allows for greater flexibility in deployment, accommodating various existing infrastructure setups without the need for substantial upgrades or changes. Moreover, the ability to support both symmetrical and asymmetrical bandwidth options caters to a wide range of applications, from voice to video to data services.

The device also integrates quality of service (QoS) features, which prioritizes different types of traffic to ensure that critical applications receive the necessary bandwidth for optimal performance. This is particularly valuable for businesses that rely on real-time communications, such as VoIP or video conferencing, where delay or packet loss can significantly impact productivity.

Security is another crucial aspect of the ADTRAN 610200094. It includes built-in firewall capabilities that protect the network from external threats and unauthorized access. This security feature is essential for businesses that handle sensitive information, ensuring that data integrity and confidentiality are maintained.

In terms of manageability, the ADTRAN 610200094 supports various management protocols, allowing IT administrators to easily monitor and configure the device according to their specific needs. This feature streamlines network management processes, contributing to an efficient overall network operation.

In conclusion, the ADTRAN 610200094 stands out as a premium solution for businesses seeking to enhance their communication systems. With its comprehensive features, support for modern technologies, and robust security measures, this device is well-equipped to handle the demands of today's digital age, making it a valuable asset for any organization.