Speaker Connection Precautions

Connecting the AV receiver—Continued

Read the following before connecting your speakers:

•North American models: Only connect speakers with an impedance of 6 ohms or higher. If you use speakers with a lower impedance, and use the ampli- fier at high volume levels for a long period of time, the built-in protection circuit may be activated.

•Other models: You can connect speakers with an impedance of between 4 and 16 ohms. If the imped- ance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, be sure to set the minimum speaker impedance to “4 ohms” (see page 51). If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.

•Disconnect the power cord from the wall outlet before making any connections.

•Read the instructions supplied with your speakers.

•Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive

(+) terminals, and negative (–) terminals only to nega- tive (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

•Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

•If you use 4 or 5 speakers, connect each of the two surround speakers to the SURR SPEAKERS termi- nals. Do not connect them to the SURR BACK SPEAKERS terminals.

•Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

• Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel.

Doing so may damage the AV receiver.

•Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.

•Don’t connect one speaker to several terminals.

Connecting the Speaker Cables

1	Strip about 5/8" (15 mm)	15 mm
	of insulation from the
	ends of the speaker
	cables, and twist the bare
	wires tightly, as shown.
2	Unscrew the terminal.
3	Fully insert the bare
	wires.
4	Screw the terminal tight.

The following illustration shows which speaker should be connected to each pair of terminals.

If you’re using only one surround back speaker, connect it to the left (L) SURR BACK SPEAKERS terminals.

Surround Surround Surround Surround

back left back right left right

speaker speaker speaker speaker

Front right	Front left	Center
speaker	speaker	speaker

DTR-5.8 specifications

The Integra DTR-5.8 is a high-performance AV receiver that stands out in the crowded home theater market. Known for its excellent sound quality and advanced features, this model is tailored for audio enthusiasts who demand fidelity and functionality.

At the heart of the DTR-5.8 is its robust amplification system, delivering a powerful 105 watts per channel into 8 ohms. This ensures that it can easily drive a variety of speakers, whether for subtle background music or explosive cinematic soundtracks. The receiver is equipped with a 7.2 channel output, allowing users to set up a surround sound system that includes additional subwoofers for deeper bass response.

One of the standout features of the DTR-5.8 is its support for advanced surround sound formats, including Dolby Atmos and DTS:X. These immersive audio technologies create a three-dimensional soundstage, enabling users to experience cinema-like audio at home. The receiver also supports Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition sound quality for Blu-ray and other high-resolution formats.

Regarding connectivity, the Integra DTR-5.8 offers a wide range of options, including multiple HDMI inputs with 4K upscaling capabilities. This allows users to connect a variety of source devices, from game consoles to streaming boxes, with high resolution and ease. The HDMI ports also support HDCP 2.3, ensuring compatibility with the latest content protections.

Another key characteristic of the DTR-5.8 is its multi-room audio capability. With built-in Zone 2 audio output, users can enjoy music in different areas of their home simultaneously. Additionally, the receiver supports streaming services like Spotify, Tidal, and Pandora, allowing for seamless access to a vast library of music.

The user interface is intuitive, thanks to an on-screen display and a well-organized remote control. Furthermore, the DTR-5.8 supports network features, including Wi-Fi and Ethernet connectivity for easier setup and access to online content, as well as integration with smart home systems.

In summary, the Integra DTR-5.8 is a feature-rich AV receiver that offers phenomenal sound quality, versatile connectivity options, and support for the latest audio formats. Whether you're a movie buff or a music lover, the DTR-5.8 is designed to enhance your home entertainment experience, making it a top choice for anyone looking to build a premier home theater system.

Connecting the AV receiver—Continued