Coway Filter Replacement Instructions for AP-1008CH and AP-1008BH Models
Page 19

FILTER REPLACEMENT

■How to replace filters

-Check that the ‘front’ sides of filters are in the correct direction.

-To maintain optimal performance of the product, use original coway filters.

-Always unplug the air purifier before replacing filters.

■Filter cleaning and replacement cycles

Filter

cycles

method

Pre-filter

Every 2~4 weeks

Cleaning

A3TM medium filter

Every 4 months

Cleaning

Every 30 months

Replacement

 

HEPA filter

Every 30 months

Replacement

∗Each service life is based on 24-hour use in Speed step 1.

∗The recommended filter replacement cycles may differ depending on the operating environment.

■Filter replacement indicator

1.Button indicator is turned on one by one clockwise when the filter needs to be replaced.

2. Airflow LED indicates a filter that needs to be replaced. Step 1 LED : HEPA

Step 2 LED : A3TM medium

3. When the filter replacement indicator is displayed, the pollution level indicator is turned off.

4.The filter replacement indicator is displayed for 5 minutes in every half an hour.

5.After replacing filter, push the Reset button one time.

6.When you have replaced a filter before the filter replacement cycle is reached, press and hold the RESET button for 1 second(forcible reset). The forcible reset initializes all the filter replacement cycle counters.

■Replacing filters

1. When replacing filter, check that the front side is In the correct direction.

2. With the power is on, press the reset button with a sharp tool.

Maintenance

CLEANINGMETHOD /

FILTER REPLACEMENT

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Coway Air Purifier AP-1008BH/CH A3 medium filter FeaturesPower saving mode A3TM medium filterDear Customers ContentsElectricity Safety Safety InformationDo not install the product on a sloped floor Installation SafetyOr combustible materials are used or stored Operation Safety Cycles Unplug the product before you clean itOutlet Do not let children hang on to the product or climb on itFront Parts NamePre-filter AIR Purified ProcessOpen the front cover How to install filterPreparations Please Check Before UseLight sensor Speed indicatorOperation / Indication Part Indication PartOperation Part Polluted Highly Light purple Dark purple CleanBlue Lightly pollutedPress the power button and then select the auto mode button HOW to USETo operate the manual mode To select the auto modeTo operate the silent mode Speed step Adjust Particle SensorHow to Adjust the Sensitivity of the Pollution Sensor Sensitive Standard InsensitiveCleaning the front cover Cleaning the air inlet and outlet every 2 monthsCleaning the product body every 2 ~ 4 weeks Cleaning the pre-filter every 2 ~ 4 weeks Cleaning MethodFilter replacement indicator Filter ReplacementHow to replace filters Filter cleaning and replacement cyclesOff the fan automatically TroubleshootingSymptom Check Measures to take Switches to power saving mode, turningProduct specification Air Purifier SpecificationAP-1008BH/CH Call Center 213 386-9900 / 213 FAX 213 Add Woongjin Coway USA, INC001
Top Page Image Contents