FoodSaver® Bottle Stoppers
FoodSaver® Vacuum Packaging Canisters (without large knob on lid)
To release vacuum and open, push gray rubber button on lid.
Quick Marinators (with large knob on lid) and Universal Lids
To release vacuum and open, turn knob on lid to Open.
FoodSaver® Jar Sealer with Mason Jars
Insert Accessory Hose into Port
How to Open FoodSaver®
1. Prepare container according to FoodSaver® Accessory Guidelines above.
2. With lid closed, insert one end of Accessory Hose (A) into Port (O) on appliance. Insert other end into port on accessory.Twist black
tab while inserting to ensure a tight fit.
5. For accessories without a large knob on lid, vacuum package using instructions below.
2. Wipe rim of canister, container or bottle to ensure it is clean and dry.
3. Place lid on canister or container, or place stopper in bottle.
4. For accessories with a large knob on lid, turn knob to Vacuum.Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose (A).
1. Always leave at least one inch of space between contents and rim.
Accessories for Vacuum Packaging
How to Prepare FoodSaver®
Accessories include FoodSaver® Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
FoodSaver®
Accessories
How to Vacuum Package with FoodSaver® Accessories
5. Push the Canister Vacuum Button (Q). Motor will run until vacuum process is complete.
3. | Lock the Latch (E) on side of appliance | |
| before vacuuming. | |
4. | If vacuum packaging in a large canister, push |
| High Speed Setting (P) Button. | Accessories |
| |
6. When motor turns off, gently twist and remove Accessory Hose from accessory and appliance. Unlock Latch.
7. To test vacuum, simply tug on accessory lid. It should not move.
Note: For important tips on using accessories with different foods, please refer to the FoodSaver® Reference Guide.
Accessories after Vacuum Packaging
For use with Ball® and Kerr ® brand Mason jars.
To release vacuum and open, wedge spoon between Mason jar lid and highest part of threaded rim.Twist spoon gently to release vacuum.
IMPORTANT: Do NOT use screw bands when vacuum packaging jars.
To release vacuum and open, simply pull up on
Bottle Stopper.
