Template
Beverage Center & Wine Chiller
Template For Nameplate Location
To be used when door swing has been reversed, with handle on right side, hinge on left side.
To position new nameplate:
•Remove the original nameplate, now located on the bottom of the door.
•Cut template along dotted line.
•Hold or tape template behind glass door in the upper left corner so that it is visible from the front side.
•Remove backing from Monogram nameplate.
•Place nameplate onto front side of door, matching illustration on template.
Upper Left |
|
|
Corner of |
|
|
Glass | Top |
|
| of Name | Top of |
| Plate | |
|
| Glass Door |
DOOR |
|
|
NAME PLATE |
|
|
LOCATION |
|
|
Door |
|
|
Frame Side |
|
|
P/N |
|
|
41005263 |
|
|
| Cut on Dotted Line | |
Upper Left |
| Top of Glass Door |
Corner of | Top of Name Plate | |
Glass |
|
|
|
|
|
DOOR
NAME PLATE
LOCATION
Door Frame Side
NOTE: While performing installations described in this book, safety glasses or goggles should be worn.
| For Monogram local service in your area, call |
| |
| NOTE: Product improvement is a continuing endeavor at General |
® | Electric. Therefore, materials, appearance and specifications are |
Monogram. | subject to change without notice. |
|
Pub. No.
Part No. 197D4432P001
(N.D. 204) 6/01
General Electric Company Louisville, KY 40225
41006773 Rev. A