Charging Roomba
Cleaning with Roomba
You need to charge Roomba before cleaning for the first time.
1Place APS battery into Roomba Robotic Floorvac. Press down on both ends.
2Plug the charger directly into Roomba.
Cleaning Pattern
Before cleaning with Roomba, clear the floor of loose objects. If you don't vacuum over it, don't use Roomba over it (e.g., rug tassels, power and blind cords).
Roomba will clean based on the cleaning mode you select. Roomba has two cleaning modes:
Clean mode - Roomba automatically calculates the room size and adjusts its cleaning time appropriately. Roomba may clean for up to 60 minutes.
For best battery performance, always
keep Roomba plugged in.
3Charge for 7 hours.
4Power light will turn solid green to indicate a full charge.
5Unplug the charger and press clean.
6Roomba will run for up to 120 minutes on hard floors. Run times may vary based on floor surface.
Spot mode - Roomba will spiral approx- imately 3 feet in diameter and then spi- ral back to where it started, intensly cleaning a localized area.
You can use a Virtual Wall to block
off areas you don't want Roomba to enter.
(See page 10)
4 | 5 |