Zanussi ZYB 590 XL, ZYB 591 XL manual Cleaning

Cleaning

Cleanthesetofshelfsupportswithtelescopicrailson the outside only with commercially available detergents.Rinse well and dry with a soft cloth.

Thetelescopicrailsmustnotbecleaned in the dishwasher.

When cleaning the shelf supports, take care not to remove the lubricating grease behind the telescopic runners. This is meant to ensure their good operation.

Once the cleaning is carried out, refit the shelf sup- ports following the procedure in reverse.

Please, ensure the retaining nuts are securewhenrefittingtheshelfsupport.

To activate the pyrolytic cleaning function proceed as follows:

1.Press button to switch on the oven. Press the button as often as necessary, until the

“Pyro“ function symbol (level 1 - P I) will appear in the display (Fig. 19).

Simultaneously, the symbol and the “Pyro” message will flash in the display and an acoustic signal will be emitted (Fig. 20).

This means that, before activating the pyrolytic cleaning function, you have to remove the shelf supports and all the oven accessories.

2.The Cooking Duration symbol will flash

for 5 seconds; during this time push ' ' or '' buttons to select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function (Fig. 21).

3.Once you have chosen the desired pyrolytic function, the “Pyro”message will flash in the display waiting for confirmation to start the pyro cleaning function.

4.To confirm which pyrolytic function you desire,

press button . The “Pyro” message will

stop flashing and the symbol will

Fig. 19

Fig. 20

Fig. 21

27