Zanussi ZYB 591 XL, ZYB 590 XL manual How to use the pyrolytic cleaning function

How to use the pyrolytic cleaning function

Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that the oven is empty. Do not leave anything inside it (e.g. pans, grids, baking tray, dripping pan, etc.) as this could heavily damage them.

Ensure that the oven door is closed before activating the pyrolytic cleaning function.

When the pyrolytic cleaning function is on, it is advisable not to use the hob as this could cause overheating and damage the appliance.

Duringthepyrolyticcleaningcycletheoven doorbecomeshot.Childrenshouldbekept awayuntilithascooled.

Choose this function to clean the oven by pyrolysis. The following pyro levels are available:

Pyrolytic 1 (P I) time : 2 h = 30 min heat-up +1 h at 480°C + 30 min cooling down.

Pyrolytic 2 (P 2) time : 2 h 30 min. = 30 min heat-up +1 h 30 min at 480°C + 30 min cooling down.

The pyro duration time cannot be changed.

Remove the shelf supports and all oven

accessories before activating the pyrolytic cleaning cycle.

Toremovetheshelfsupports,proceedasfollows:

Before proceeding ensure the oven is

cool and disconnected from the elec- tricity supply.

Removal

1.remove the front screw while keeping the shelf support in position with the other hand (Fig. 17).

2.Disengage the rear hook and take off the shelf support. Do the same thing on the other side of the oven (Fig. 18).

Fig. 17

Fig. 18

26