To programme the pyrolytic cleaning cycle (delayed start, automatic stop)
If you desire, you can programme the starting and ending time of the pyrolytic cleaning cycle.
1.Press button 
to switch on the oven. Press
button 
as often as necessary, until the
“Pyro“ function symbol 
(level 1 - P I) appears in the display.
Simultaneously the “Pyro” message and the
symbol 
will flash in the display and an acoustic signal will be emitted. This means that, before activating the pyrolytic cleaning function, you have to remove the shelf supports and all the oven accessories (as explained in the previous paragraph).
2.The cooking duration symbol 
will flash
for some seconds; during this time push ' ' or '
' buttons to select the pyrolytic 1 (P I) or pyrolytic 2 (P 2) function.
3.Once you have chosen the desired pyrolytic function, “Pyro” will flash in the display waiting for confirmation to start the pyrolytic cleaning function.
At this time, push the time function button
(Fig. 24). The end of cooking symbol
and the arrow symbol 
will flash. The control panel will display the end of the cleaning cycle (that is, the actual time + cooking duration time).
Push ' ' or '
' buttons to select the required end of cycle time (Fig. 24).After a few seconds,
the “Pyro” message and the symbol 
will stop flashing, the acoustic signal will stop
while the cooking duration symbol 
will flash until the pyrolytic cleaning cycle start.
4. After some time, the door lock will be activated
and the related symbol 
will be displayed.
At the end of the pyrolytic cleaning process, the display shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
press button 
.
Fig. 24
29
