Pyrolytic cleaning
The oven cavity is coated with a special enamel resistant to high temperatures.
During the pyrolytic cleaning operation, the tempe- rature inside the oven can reach about 500 °C thus burning food residuals.
For your security, during the pyrolytic cleaning operation, the oven door automatically locks when the temperatureinside theovenapproaches about 300 °C.
Upon completion of the cleaning operation, the oven door will be locked until the oven cavity has cooled down.
The cooling fan operates until the oven has cooled down. After cooking, it is advisable to remove all the food residues with a wet sponge.
However, from time to time, it will be necessary to do a more complete and thorough cleaning, using the pyrolytic cleaning function. You can select two different levels of pyrolytic cleaning depending on how dirty the oven is.
If the oven cavity is not very dirty, we recommend that you select the pyrolytic 1 function (P I) in the programmer display.
It is advisable to wipe the oven over with a soft sponge soaked in warm water after each pyrolytic cleaning cycle is carried out.
If the oven cavity is very dirty, we advise you to selectthepyrolytic2function(P2)intheprogrammer display.
During the pyrolytic cleaning function, it is not possible to use the oven for 2 hours when selecting the Pyr 1 function and up to 2 1/2 hours when the Pyr 2 function is active.
After a significant number of cooking, the cleaning reminder suggests to activate a pyrolytic cleaning cycle. The “Pyro” message will flash in the display and an acoustic signal will be emitted for about 15 seconds.
Select the type of pyrolytic cycle depending on how dirty the oven is. The reminder message will be displayed each time the oven is switched off until a complete pyrolytic cleaning cycle is performed.
25
