When the oven is first installed
Remove all packaging, both inside and outside the oven, before using the oven.
When the oven is first connected to the electrical supply, the display will automatically show 12:00
and the symbol 
will flash.
Ensure the correct time of day is set before using the oven.
To set the correct time of day:
1) Press button 
and, while the symbol 
is
flashing, set the correct time of day by pressing buttons “ “ or “ 
“ (Fig. 1).
The time arrow symbol 
will disappear about 5 seconds after the correct time is displayed.
2)if the symbol 
is not flashing anymore,
press button 
twice.
Then, proceed as described in point 1).
Before first use
The oven should be heated without food. To do that, proceed as follows:
1) press button 
to switch on the oven.
2) press button 
twice and select the
"Conventional Cooking" function (Fig. 2).
3)set the temperature to 250 °C using the increasing push button “ 
“.
4)Allow the oven to run empty for approximately 45 minutes.
5)open a window for ventilation.
This procedure should be repeated with the
"Fan Cooking" 
and "Full Grill" 
function for approximately
Fig. 1
Fig. 2
8
