CARE
Cleaning the Upper Corotron
Periodic cleaning of the corotron will reduce print quality problems caused by accumulation of toner inside the printer.
CAUTION
Use care when removing and replacing the corotron to avoid scratching the photosensitive drum inside the printer. Do not force the corotron in or out of
the printer.
1.Switch off the power to the printer.
2.Open the right side cover.
3.Locate instruction label (1) and follow the instructions to remove and replace the upper corotron: (1).
5.Lay the corotron on a flat surface to expose the corotron wires for cleaning.
6.Clean the corotron wires using a
7.Rub the wires gently from end to end until most of the toner is removed.
8.Turn the corotron over and clean the wire(s) on the other side.
9.Allow the corotron to dry before replacing.
33
