MEDIA INFORMATION
Loading the Media - Rolls 1, 2, 3
10
Roll 3 only:
11.Rotate the lower feed roller until the lead edge is visible in the center of the viewing hole.
BELT
12.Set the switches for the series and type of media you have loaded, from front to rear:
•Film
•Vellum
•Plain Paper
•Eng. (8.5”/11”) or Arch. (9”/12")
13.Push the drawer in until it is closed and latched.
NOTE: Ensure that the rubber tracking belt is underneath the plastic roller on the paper spindle. If not, the printer will indicate an
