CLEARING THE MEDIA PATH
Media Jam J-11
1.Open the Manual Bypass Shelf and all three drawers in order to locate the jam.
2.Rewind the jammed roll until the lead edge of the paper comes out of the feed rollers.
4.If you are unable to rewind the jammed roll easily, gently loosen the jam through the opening at the rear of the Manual Bypass Shelf.
5.Remove any scraps or torn pieces of paper from the inside of the printer.
6.Trim the lead edge of the roll squarely to remove any torn or wrinkled paper.
6.Insert the lead edge of the paper between the upper and lower feed rollers and feed an inch of paper between the feed rollers.
7.Roll 3 only: Rotate the lower feed roller until the lead edge is visible in the center of the viewing hole.
8.Push the drawers and Manual Bypass Shelf into the closed and latched position.
25
