![](/images/new-backgrounds/1158589/15858929x1.webp)
MEDIA INFORMATION
Loading the Media - Rolls 1, 2, 3
1.Pull the handle and open the drawer which requires the media.
2.Rewind the paper remaining on the roll.
3.Hold the roll at both ends and lift the roll out of the drawer.
4.Press the green lever at the end of the spindle.
5.Slide the spindle out of the paper core.
6.Press the green locking lever and insert the spindle into the new roll of paper.
7.Align the edge of the roll with the appropriate width dimension on the spindle.
NOTE: To avoid unnecessary strain, load the heaviest roll in the Top Drawer and the lightest rolls at the bottom.
8.Hold the roll at both ends and set the roll into the drawer.
9.Insert the lead edge of the paper between the upper and lower feed rollers.
10.Rotate the lower roller by hand in order to feed an inch of paper between the rollers.
9
Media Information