MANUAL BYPASS FEED
The bypass feed mode is used when the print, which is being sent to the printer, is a different size than the roll media loaded in the printer.
For example:
You want to send a C size print, but there is no C size media loaded in the printer. You can use the bypass feed mode to run the C size print, using cut sheet media.
When the correct media is not loaded for an incoming print, the Status Display shows the
flashing code
1.Adjust the paper guides to the correct size.
2.Feed the cut sheet media squarely into the printer, curl side down and between the guides, until the media stops.
• The Status Display indicates the size when the media is loaded
15
Manual Bypass
