Nilfisk-Advance America GR 8000 manual Operating Procedure cont…, During Use

Page 10

English

Operating Procedure cont….

………………………………………………...

11.The handle controls are now active.

The fan switch on the hose handle will release steam when pressed.

Pressing the detergent switch located on the top of the handle will activate the

detergent pump. Hold the switch as long as you need to dispense the detergent. Releasing the switch will stop the detergent supply.

12.The steam output can be adjusted by the steam control knob (Number 3 Diagram A)

13.Choose and fit the required accessory (Diagram C) to the hose handle.

!!When changing accessories during use please note these will be hot.

During Use

………………………………………………...

Cold Water Tank Empty(Number 2 Diagram A)

1.Refill the cold water tank when the refill cold water LED (Number 15 Diagram B) is illuminated. A buzzer will sound and the steam will no longer come out of the nozzle when the steam switch on the handle is pressed.

2.Always empty the collection tank each time the cold-water tank is refilled.

3.The pumps will not work when the cold-water tank is empty.

4.Once the cold water refill LED is illuminated the boiler heater will remain on for 30 minutes. If the cold-water tank is not refilled within 30 minutes and the machine is left powered on the boiler heater will switch off.

Detergent Tank Empty (Diagram D)

1.If the detergent does not come out of the nozzle when the detergent switch on the handle is pressed, refill the detergent tank (Diagram D)

10

Image 10
Contents Page English Contents Diagram B ComponentsDiagram C AttachmentsAccessories Congratulations GuidanceGetting the Best Results Installation Do not screw them all the way in at this pointOperating Procedure Operating Procedure cont… During UseWeekly Maintenance MaintenanceDaily Maintenance Safety PrecautionsService & Guarantee ServiceGuaranteeTechnical Technical InformationTrouble Shooting Symptom Possible cause Action