Redring manual HOW to USE Your Active 320S Shower Detailed, If Water is TOO Cold

Page 3
IF WATER IS TOO HOT
Turn inner knob “B” anti-clockwisein the direction of the “blue arrows” to “11 o’clock” and continue turning anti-clockwise until you get the water temperature of your liking.
Wait 20 seconds after each adjustment for the water temperature to stabilise.
If after turning fully anti-clockwise, water is still too hot, adjust outer knob “A” to
“ (medium)” setting and re-adjust as above. Water flow will be reduced on this setting.

9. Isolate the mains electrical and water supply before removing the front cover of the appliance.

HOW TO USE YOUR ACTIVE 320S SHOWER (DETAILED)

1.Ensure the electricity and water are turned on to the unit.

2.Your shower has 3 power settings selected by turning outer knob “A”.

The most popular is “ (high)”.

There are also options for a “ (medium)” or “ (cold)” shower (see notes 8 and 9).

For this example turn outer knob “A” to “ (high) ” and set inner knob “B” to “12 o’clock”.

3.The water will flow and the neon light will glow brightly.

4.Allow about 20 seconds for the temperature of the water to stabilise.

IF WATER IS TOO COLD

Turn inner knob “B” clockwise in the direction of the “red arrows” to “1 o’clock” and continue turning clockwise until you get the water temperature of your liking.

Wait 20 seconds after each adjustment for the water temperature to stablise.

5. Once a temperature setting to your liking has been achieved, inner knob “B” will rarely need adjusting. You must however take into account required adjustments for variations of incoming mains water temperature

between summer and winter (see “Effect of Seasonal Incoming Water Temperature Changes”).

6.When you have finished showering, turn outer knob “A” anti-clockwise to the “ (stop)” position. Water will continue to flow for up to 3 seconds before switching off. This reduces the temperature of the water in the tank for the next user.

Switch off the electricity at the ceiling switch or local isolator.

7.The “ (medium)” setting of outer knob “A” reduces the power used by the shower giving a cooler shower or the option of reduced water flow. This option is mainly used for summer usage and if this is used then inner knob “B” must be re-adjusted.

8.The “ (cold)” setting of outer knob “A” will supply water without any heating, and the neon light will go out.

9.Your shower is designed to stabilise temperature changes caused by water pressure fluctuations (see “Effect of Other Water Devices on Incoming Water Supply”).

10.Note that inner knob “B” IS NOT A TAP and does not turn the water off.

WARNING: DO NOT SWITCH THE SHOWER ON IF YOU SUSPECT IT OF BEING FROZEN. WAIT UNTIL YOU ARE SURE IT HAS THAWED OUT.

WARNING: DO NOT OPERATE THE SHOWER IF WATER LEAKS FROM THE PRESSURE RELIEF VALVE. MAINTENANCE IS REQUIRED BEFORE THE SHOWER CAN BE SAFELY USED.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Redring Active 320S Smart Technology Electric Shower Introduction ContentsIf Water is TOO Cold HOW to USE Your Active 320S Shower DetailedEffect of Seasonal Incoming Water Temperature Changes HOW Your Active 320S Shower WorksEffect of Other Water Devices on Incoming Water Supply Self Help HOW to Maintain Your Active 320S ShowerYOU Must Clean the Shower Handset Regularly What to do if Things GO WrongRedring After Sales Service Professional ServiceRing 08709 000420 UK only Fixing the Shower to the Wall HOW to Install Your Active 320S ShowerPlumbing These Instructions Could Result in Failure Terminal Block Page Guarantee and Contact Details Additional Accessories Spare PartsTEL +44 0 1733 FAX +44 0 1733 HOW to USE Your Active 320S Shower SummaryLeaflet No -2136-01B

320S specifications

The Redring 320S is a compact, electric instant water heater that has gained popularity for its efficiency and convenience in providing hot water on demand. With a powerful output of 3 kW, it efficiently heats water instantly, making it an ideal solution for various applications in homes, offices, and other facilities.

One of the key features of the Redring 320S is its compact size. The unit is designed to be wall-mounted, ensuring that it does not take up unnecessary space in smaller areas such as kitchenettes or bathrooms. This compact design does not compromise performance, as it can deliver a consistent and reliable flow of hot water whenever needed.

The Redring 320S utilizes innovative heating technologies to achieve fast heating times. With its advanced heating element, the device can provide hot water at a rate of approximately 3 liters per minute. This means that users can enjoy a steady supply of hot water for tasks such as washing dishes, showering, or performing other daily routines without the wait associated with traditional storage water heaters.

Another characteristic that sets the Redring 320S apart is its energy efficiency. By operating only when hot water is needed, the unit minimizes energy consumption compared to conventional systems that continuously heat a storage tank. This results in lower energy bills and a more sustainable solution for hot water generation.

The device also comes equipped with user-friendly control features, allowing users to adjust the temperature settings easily. This personalization ensures that everyone can find their ideal water temperature, enhancing comfort and convenience.

Safety is a priority with the Redring 320S, which features built-in thermal cut-out protection. This technology prevents overheating and ensures that the device operates within safe temperature limits, providing peace of mind to users.

In conclusion, the Redring 320S is a versatile and efficient instant water heater that boasts a range of features designed to meet modern demands for hot water. Its compact design, rapid heating capability, energy efficiency, user-friendly controls, and safety features make it a standout choice for anyone in need of a reliable hot water solution. Whether in a home or commercial setting, the Redring 320S delivers performance and convenience that users can rely on.
Top Page Image Contents