HOW to Maintain Your Active 320S Shower, Self Help

will turn off the power to the heating elements, resulting in a cold shower. This will be indicated by the neon light going out.

HOW TO MAINTAIN YOUR ACTIVE 320S SHOWER

It is recommended that the shower unit and hose etc. be cleaned using a soft cloth and that the use of abrasive or solvent cleaning fluid be avoided.

We recommend that before any cleaning, the isolating switch be turned off, thus avoiding accidentally switching on the shower.

WARNING: IN ORDER TO MAINTAIN THE PERFORMANCE OF YOUR SHOWER,

YOU MUST CLEAN THE SHOWER HANDSET REGULARLY

All water contains particles of lime, which build up in the shower handset and unit reducing the performance.

It is therefore important to clean the shower handset by simply rubbing the rubber nozzles.

NOTE: After use it is normal for some water to drip from the shower handset for a few moments. This inhibits scale build-up over prolonged use.

WHAT TO DO IF THINGS GO WRONG (1)

SELF HELP

If the shower is unsatisfactory, make the following checks before calling out the contractor. Any one of these adjustments could restore the performance.

The shower cycles	The shower temperature is set too hot causing the thermal cut-out (safety
from HOT to COLD	device) to operate.
	Turn inner knob “B” anti-clockwise in the direction of the “blue arrows” to
	increase water flow.
	Slowly increase the water temperature by turning inner knob “B” clockwise in
	the direction of the “red arrows” until a comfortable showering temperature has
	been reached.
	You MUST WAIT approximately 20 seconds for each adjustment to affect the
	water temperature.
	“ (medium)” setting may need to be selected.

Water too HOT	Increase water flow by adjusting inner knob “B” anti-clockwise (direction of the
	“blue arrows”).
	“ (medium)” setting may need to be selected.
	Increase pressure to water supply e.g. fully open service valve or stop cock.
	Check hose is not kinked restricting the water flow.
	Clean shower handset.

Water too COLD	Check power is on by neon being illuminated.
	Decrease water flow by adjusting inner knob “B” clockwise (direction of the “red
	arrows”).
	“ (high)” setting may need to be selected.

Spray pattern poor	Clean the shower handset.
Water takes longer	Thermal cut-out has operated after previous use
to heat up	(automatically resets when unit cools down)
	“ (high)” setting may need to be selected.
Water goes cold	Check neon light is on.
while using	Check water pressure has not fallen so far as to let pressure switch cut out,
shower	e.g. Another tap drawing water off.
	Raise position of shower handset.

320S specifications

The Redring 320S is a compact, electric instant water heater that has gained popularity for its efficiency and convenience in providing hot water on demand. With a powerful output of 3 kW, it efficiently heats water instantly, making it an ideal solution for various applications in homes, offices, and other facilities.

One of the key features of the Redring 320S is its compact size. The unit is designed to be wall-mounted, ensuring that it does not take up unnecessary space in smaller areas such as kitchenettes or bathrooms. This compact design does not compromise performance, as it can deliver a consistent and reliable flow of hot water whenever needed.

The Redring 320S utilizes innovative heating technologies to achieve fast heating times. With its advanced heating element, the device can provide hot water at a rate of approximately 3 liters per minute. This means that users can enjoy a steady supply of hot water for tasks such as washing dishes, showering, or performing other daily routines without the wait associated with traditional storage water heaters.

Another characteristic that sets the Redring 320S apart is its energy efficiency. By operating only when hot water is needed, the unit minimizes energy consumption compared to conventional systems that continuously heat a storage tank. This results in lower energy bills and a more sustainable solution for hot water generation.

The device also comes equipped with user-friendly control features, allowing users to adjust the temperature settings easily. This personalization ensures that everyone can find their ideal water temperature, enhancing comfort and convenience.

Safety is a priority with the Redring 320S, which features built-in thermal cut-out protection. This technology prevents overheating and ensures that the device operates within safe temperature limits, providing peace of mind to users.

In conclusion, the Redring 320S is a versatile and efficient instant water heater that boasts a range of features designed to meet modern demands for hot water. Its compact design, rapid heating capability, energy efficiency, user-friendly controls, and safety features make it a standout choice for anyone in need of a reliable hot water solution. Whether in a home or commercial setting, the Redring 320S delivers performance and convenience that users can rely on.