HOW to USE Your Active 350S Shower Detailed

HOW TO USE YOUR ACTIVE 350S SHOWER (DETAILED)

1.Ensure the electricity and water are turned on to the unit.

2.Your shower has 3 power settings selected by turning outer knob “A”.

The most popular is “ (high)”.

There are also options for a “ (medium)” or “ (cold)” shower (see notes 8 and 9).

For this example turn outer knob “A” to “ (high) ” and set inner knob “B” to “12 o’clock”.

3.The water will flow and the neon light will glow brightly.

4.Allow about 20 seconds for the temperature of the water to stabilise.

IF WATER IS TOO COLD

Turn inner knob “B” clockwise in the direction of the “red arrows” to “1 o’clock” and continue turning clockwise until you get the water temperature of your liking.

Wait 20 seconds after each adjustment for the water temperature to stabilise.

If after turning fully clockwise water is still too cold, set shower pattern on shower handset to outer or inner pattern only.

IF WATER IS TOO HOT

Turn inner knob “B” anti-clockwise in the direction of the “blue arrows” to “11 o’clock” and continue turning anti-clockwise until you get the water temperature of your liking.

Wait 20 seconds after each adjustment for the water temperature to stabilise.

If after turning fully anti-clockwise, water is still too hot, adjust outer knob “A” to “ (medium)” setting and re-adjust as above.

Water flow will be reduced on this setting.

5.Once a temperature setting to your liking has been achieved, inner knob “B” will rarely need adjusting. You must however take into account required adjustments for variations of incoming mains water temperature between summer and winter (see “Effect of Seasonal Incoming Water Temperature Changes”).

6.When you have finished showering, turn outer knob “A” anti-clockwise to the “ (stop)” position.

Water will continue to flow for approximately 7 seconds before switching off. This reduces the temperature of the water in the tank for the next user.

Switch off the electricity at the ceiling switch or local isolator.

7.The “ (medium)” setting of outer knob “A” reduces the power used by the shower giving a cooler shower or the option of reduced water flow. This option is mainly used for summer usage and if this is used then inner knob “B” must be re-adjusted.

8.The “ (cold)” setting of outer knob “A” will supply water without any heating, and the neon light will go out.

9.Your shower is designed to stabilise temperature changes caused by water pressure fluctuations (see “Effect of Other Water Devices on Incoming Water Supply”).

10.Note that inner knob “B” IS NOT A TAP and does not turn the water off.

WARNING: DO NOT SWITCH THE SHOWER ON IF YOU SUSPECT IT OF BEING FROZEN. WAIT UNTIL YOU ARE SURE IT HAS THAWED OUT.

WARNING: DO NOT OPERATE THE SHOWER IF WATER LEAKS FROM THE PRESSURE RELIEF VALVE. MAINTENANCE IS REQUIRED BEFORE THE SHOWER CAN BE SAFELY USED.

WARNING: CONSIDERATION SHOULD BE GIVEN TO SUPERVISING THE YOUNG, ELDERLY AND THE INFIRM WHILST THEY USE THIS SHOWER.

350S specifications

The Redring 350S is a cutting-edge electric shower that epitomizes convenience and efficiency. With a sleek design and modern aesthetic, it seamlessly integrates into any bathroom décor while offering an unparalleled showering experience. This electric shower unit is specifically tailored to meet the needs of households looking for reliable and instantaneous hot water.

One of the standout features of the Redring 350S is its impressive power output. Operating at 9.5 kW, it ensures a strong and consistent flow of hot water, delivering an invigorating shower each time. This power level is ideal for busy households where multiple users might be taking showers in quick succession, providing enough heat even during peak usage.

The Redring 350S is equipped with advanced heating technology that utilizes a compact design to maximize space efficiency. Its lightweight construction makes installation straightforward, and the unit is designed to fit standard plumbing connections, making it an ideal upgrade for older models or as a new installation in modern bathrooms.

Safety is a top priority in the design of the Redring 350S. The shower includes an anti-scald feature, which helps to maintain a consistent temperature, reducing the risk of burns and ensuring a safe and pleasant experience. Additionally, the water flow is automatically regulated, which prevents fluctuations that could lead to discomfort during showering.

User-friendly controls are another hallmark of the Redring 350S. It features an intuitive adjustable temperature dial that allows users to customize their shower experience to their liking. The design also includes an illuminated power indicator, which notifies users when the unit is operational, enhancing safety and ease of use.

Furthermore, the Redring 350S is designed with energy efficiency in mind. It heats water on demand, which means no energy is wasted heating a tank of water that might not be used. This not only contributes to lower energy bills but also promotes environmentally friendly practices.

In conclusion, the Redring 350S electric shower combines efficiency, safety, and style, making it an excellent choice for anyone looking to enhance their bathroom experience. With its powerful performance, user-friendly features, and commitment to safety and energy efficiency, the Redring 350S stands out in the competitive market of electric showers. It is a remarkable addition to any home, designed to provide comfort and convenience for everyday use.