Redring manual HOW to Install Your Active 350S Shower, Fixing the Shower to the Wall

Page 7

HOW TO INSTALL YOUR ACTIVE 350S SHOWER

WARNING: ALL WIRING AND INSTALLATION MUST BE

SUPERVISED BY A SUITABLY QUALIFIED PERSON.

WARNING: DO NOT INSTALL THIS SHOWER WHERE IT MAY BE

SUBJECTED TO FREEZING CONDITIONS

We recommend that the installation is done in the following sequence. a. Fixing the shower to the wall b. Plumbing c. Electrical connections

a.FIXING THE SHOWER TO THE WALL

1.Position the riser rail at the height recommended in diagram 5 and mark its position (also see separate accessories fitting instructions).

2.Position the heater so that the top of the unit is horizontal and level with, or a maximum of 0.6 metres (2ft) below the top of the riser rail. Choose a flat piece of wall to avoid the possibility of distorting the backplate thus making the front cover a poor fit.

3.Adjust the position to get the most convenient arrangement taking the following into account.

∙The possible need to use the handset over the sink for hair washing etc.

∙The heater must not be mounted in the direct spray from the handset.

∙The handset must not be able to come into contact with used water in the cubicle, bath or basin. If it can, even after the hose has been retained by the soap dish (see separate accessories fitting instructions sheet) then a vacuum breaker must be fitted.

4.Fix the riser rail with screws provided (see separate instructions supplied with accessories).

5.Decide the position of the electrical cable into the unit. If top or bottom entry is chosen (according to diagram 4), cut away the walls in the backplate as shown in diagram 6.

6.Decide the position of entry of the cold water pipe into the unit. If top, cut away the backplate.

If rear, please read the section on plumbing.

If bottom, remove the front cover (complete with knobs) and cut away the detachable corner section as shown.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Redring Active 350S Smart Technology Electric Shower Introduction ContentsIf Water is TOO Cold HOW to USE Your Active 350S Shower DetailedHOW Your Active 350S Shower Works Effect of Seasonal Incoming Water Temperature ChangesEffect of Other Water Devices on Incoming Water Supply Self Help HOW to Maintain Your Active 350S ShowerYOU Must Clean the Shower Handset Regularly What to do if Things GO WrongProfessional Service Redring After Sales ServiceRing 08709 000420 UK only Fixing the Shower to the Wall HOW to Install Your Active 350S ShowerPlumbing 7.8kW 240 ElectricalRating Cable Sizes Fuse / MCB Cable Length 6.6kW 240Additional Accessories Spare Parts TEL +44 0 1733 FAX +44 0 1733 Guarantee and Contact DetailsHOW to USE Your Active 350S Shower Summary

350S specifications

The Redring 350S is a cutting-edge electric shower that epitomizes convenience and efficiency. With a sleek design and modern aesthetic, it seamlessly integrates into any bathroom décor while offering an unparalleled showering experience. This electric shower unit is specifically tailored to meet the needs of households looking for reliable and instantaneous hot water.

One of the standout features of the Redring 350S is its impressive power output. Operating at 9.5 kW, it ensures a strong and consistent flow of hot water, delivering an invigorating shower each time. This power level is ideal for busy households where multiple users might be taking showers in quick succession, providing enough heat even during peak usage.

The Redring 350S is equipped with advanced heating technology that utilizes a compact design to maximize space efficiency. Its lightweight construction makes installation straightforward, and the unit is designed to fit standard plumbing connections, making it an ideal upgrade for older models or as a new installation in modern bathrooms.

Safety is a top priority in the design of the Redring 350S. The shower includes an anti-scald feature, which helps to maintain a consistent temperature, reducing the risk of burns and ensuring a safe and pleasant experience. Additionally, the water flow is automatically regulated, which prevents fluctuations that could lead to discomfort during showering.

User-friendly controls are another hallmark of the Redring 350S. It features an intuitive adjustable temperature dial that allows users to customize their shower experience to their liking. The design also includes an illuminated power indicator, which notifies users when the unit is operational, enhancing safety and ease of use.

Furthermore, the Redring 350S is designed with energy efficiency in mind. It heats water on demand, which means no energy is wasted heating a tank of water that might not be used. This not only contributes to lower energy bills but also promotes environmentally friendly practices.

In conclusion, the Redring 350S electric shower combines efficiency, safety, and style, making it an excellent choice for anyone looking to enhance their bathroom experience. With its powerful performance, user-friendly features, and commitment to safety and energy efficiency, the Redring 350S stands out in the competitive market of electric showers. It is a remarkable addition to any home, designed to provide comfort and convenience for everyday use.
Top Page Image Contents