ResMed S8 ESCAPE SYSTEM, s8 user manual HOW to USE the S8 Escape

Page 12

HOW TO USE THE S8 ESCAPE

Please refer to the illustrations in section D of the illustration sheet.

SET UP THE S8 ESCAPE

1Place the S8 ESCAPE on a table near the head of your bed.

CAUTION

! Be careful not to place the device where it can be bumped or where someone is likely to trip over the power cord.

Note: You can also place your S8 Escape on the floor beside or underneath your bed. Ensure that the area is free from dust and clear of bedding, clothes, or any other objects that could block the air inlet.

2Connect the power cord to the socket at the rear of the flow generator (D-1). Plug the other end of the power cord into the power outlet.

WARNING

! Make sure the power cord and plug are in good condition and the equipment is not damaged.

3Connect one end of the air tubing firmly onto the air outlet (D-2).

WARNING

! • Only ResMed air tubing should be used with your flow generator. A different type of air tubing may alter the pressure you actually receive, reducing the effectiveness of your treatment.

• Blocking the hose while in operation could lead to overheating of the device.

• In the clinical environment any personal computer that is used with your CPAP system must be at least 5’ (1.5 m) away from, or at least 8’ (2.5 m) above, the patient. It must also comply with the relevant test standard. For personal computers the international standard is IEC 60950 or equivalent.

ASSEMBLE THE MASK

1Assemble your mask system according to the mask user instructions.

2Connect your mask system to the free end of the air tubing (D-3). The S8 ESCAPE is now ready for use (D-4).

START TREATMENT

1Make sure the power is on.

The product name is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on.

ENGLISH

HOW TO USE THE S8 ESCAPE 11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents S8 Escape System S8 Escape 1234 Contents System Specifications Introduction Medical InformationContraindications Medical Information Adverse Effects S8 Escape System Shows the keypad and LCD screen, and the air outletHumidifiers HOW to USE the S8 Escape Stop Treatment HOW to Attach a Humidifier Attach a Resmed Passover Humidifier HOW to USE the Keypad LCD ScreenHOW to Change the Settings on Your S8 Escape Press the Right key Exit May appear when Press the Left Ok key to remove S8 Modules Insert the Data Card English Cleaning and Maintenance Replacing the AIR Filter Frequently Asked Questions International useAltitude changes Troubleshooting Problem Possible Cause SolutionMotor Fault Settings Error Remove Card System Specifications Power outlet for HumidAireElectromagnetic Compatibility RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Page Index Weekly cleaning
Related manuals
Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 47 pages 54.64 Kb Manual 20 pages 25.84 Kb

S8 ESCAPE SYSTEM, s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents