ResMed Essential Guide to Using the S8 Manual for Your Humidifier
Page 21

1INSERT THE DATA CARD

•Switch on the S8 ESCAPE and wait until you see the standby (Ramp) screen.

•Hold the Data Card with the arrow facing up and insert it into the slot in the Data Card module (H-1).

•Push the card in smoothly until it stops moving (H-2) and messages start appearing on the LCD.

2COPY DATA ONTO THE DATA CARD

•Data copying starts automatically when the Data Card is inserted into the Data Card module.

•The “Card Inserted Please Wait” message is displayed on the S8 ESCAPE LCD while data is being copied. Copying takes approximately five seconds.

•The “Copy Complete Remove Card” message is displayed on the LCD when copying has finished.

•Remove the Data Card from the Data Card module.

3REMOVE THE DATA CARD

Grip the end of the Data Card and pull it out of the Data Card module (H-3).

4STORE THE DATA CARD

Your Data Card should be stored in its mailback envelope when not in use.

5MAIL THE DATA CARD TO YOUR CLINICIAN

A bubble mailer envelope is provided to ensure safe transportation of the Data Card. When mailing the Data Card to your clinician:

1.Insert the Data Card into the pocket provided on the mailback envelope. Fold up the mailback envelope.

2.Place the mailback envelope containing the Data Card in the bubble mailer envelope and seal it.

3.Make sure that your clinician’s name and address details are on the bubble mailer envelope, and mail it back immediately.

USING THE DATA CARD TO UPDATE SETTINGS

If your clinician has provided a Data Card with new device settings:

•With the device in standby (Ramp) mode, insert the Data Card into the slot on the Data Card module. Updating will start automatically.

•The “Card Inserted Please Wait” message is displayed on the LCD while updating is in progress. Updating takes approximately five seconds.

•The “Settings Success Remove Card” message is displayed on the LCD if the settings were updated successfully.

Note: This message only appears once. If you re-insert the Data Card after you have updated your settings, this message is not displayed.

•Remove the Data Card from the Data Card module.

•Store the Data Card in its mailback envelope when not in use.

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents S8 Escape System S8 Escape 1234 Contents System Specifications Medical Information IntroductionContraindications Medical Information Adverse Effects Shows the keypad and LCD screen, and the air outlet S8 Escape SystemHumidifiers HOW to USE the S8 Escape Stop Treatment HOW to Attach a Humidifier Attach a Resmed Passover Humidifier LCD Screen HOW to USE the KeypadHOW to Change the Settings on Your S8 Escape Press the Right key Exit May appear when Press the Left Ok key to remove S8 Modules Insert the Data Card English Cleaning and Maintenance Replacing the AIR Filter International use Frequently Asked QuestionsAltitude changes Problem Possible Cause Solution TroubleshootingMotor Fault Settings Error Remove Card Power outlet for HumidAire System SpecificationsElectromagnetic Compatibility RF emissions CISPR11 Group Page Recommended separation distance Separation distance according to frequency of transmitter Limited Warranty Page Index Weekly cleaning
Related manuals
Manual 158 pages 44.94 Kb Manual 50 pages 57.93 Kb Manual 88 pages 45.08 Kb Manual 47 pages 54.64 Kb Manual 20 pages 25.84 Kb

S8 ESCAPE SYSTEM, s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.
Top Page Image Contents