RIDGID WD1450 Vacuuming Liquids, Emptying the Drum, Moving the Wet/Dry Vac, Blowing Feature

Page 11

SP6542 14 Gallon 9/7/04 1:31 PM Page 11

Operation (continued)

Vacuuming Liquids

IMPORTANT:

1.When picking up small amounts of liquid the filter may be left in place.

2.When picking up large amounts of liquid we recommend that the filter be removed. If the filter is not removed, it will become saturated and misting may appear in the exhaust.

3.After using the vac to pick up liquids, the filter must be dried to reduce the risk of possible mildew and damage to the filter.

4.When the liquid in the drum reaches a predetermined level, the float mechanism will rise automatically to cut off air-flow. When this happens, turn off the vac, unplug the power cord, and empty the drum. You will know that the float has risen because vac airflow ceases and the motor noise will become higher in pitch, due to increased motor speed.

IMPORTANT: To reduce the risk of damage to the vac, do not run motor with float in raised position.

Emptying the Drum

WARNING: To reduce the risk of injury from accidental starting, unplug power cord before emptying the drum.

WARNING: To reduce the risk of back injury or falls, do not lift a vac heavy with liquid or debris. Scoop or drain enough contents out to make the vac light enough to lift comfortably.

1.The vac comes equipped with a drain for easy emptying of liquids. Simply unscrew the drain cap and lift the opposite side slightly to empty the drum.

2.Another option is to remove the powerhead assembly.

3.Lay powerhead assembly aside on a clean area while emptying drum.

4.Dump the drum contents into the proper waste disposal container.

Moving the Wet/Dry Vac

Should it become necessary to pick the vac up to move it, the handle on the sides of the dust drum are used to lift. To maneuver the vac, the push/pull handle on the powerhead of the unit should be used.

Blowing Feature

Your vac features a blowing port. It can blow sawdust and other debris. Follow the steps below to use your vac as a blower.

WARNING: Always wear safety goggles complying with ANSI Z87.1 (or in Canada, CSA Z94.3-99) before using as a blower.

WARNING: To reduce the risk of injury to bystanders, keep them clear of blowing debris.

1.Locate blowing port of your vac.

2.Insert the locking end of the tug-along hose into the blowing port of the vac. The hose should snap into place.

3.(Optional) Attach extension wand to opposite end of hose, then place the car nozzle on the wand.

4.Turn vac on and you are ready to use your vac as a blower.

WEAR YOUR

FORESIGHT IS

BETTER THAN

NO SIGHT

Blowing

 

 

Port TugI

-A-

 

G

 

IDLong

R

Hose

 

Swivel

End of

Hose

Extension Wand

(Optional)

Car Nozzle (Optional)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents WD1450 Table of Contents Important Safety InstructionsSP6542 14 Gallon 9/7/04 131 PM Introduction Unpacking and Checking Carton ContentsCarton Contents List Filter Cage Slots Tabs Replacement Filter AssemblyDrum/Caster Foot Assembly Accessory Storage Bag Rods Receptacles Accessory Storage BagInstalling Accessory Storage Bag Removing Accessory Storage BagButton Wet/Dry Vac AssemblyInsert Hose Drum Press Latch Pull FlangeVacuuming Dry Materials Operation= OFF Moving the Wet/Dry Vac Blowing FeatureVacuuming Liquids Emptying the DrumCord Wrap Accessory StorageMaintenance Standard Filter ReplacementWhich Replacement Filter Meets Your Needs? Applications VF4000Keep Your Environment Clean Key Description Repair PartsGallon Professional Wet/Dry Vac Model Number WD14500 Always order by Part Number Not by Key NumberServicing of DOUBLE-INSULATED WET/DRY VAC SP6542 14 Gallon 9/7/04 131 PM SP6542 14 Gallon 9/7/04 131 PM Emerson Tool Company Stock No. WD1450 Model No. WD14500No. de pieza SP6542 Manual DEL UsuarioPalabras de señal de seguridad IndiceSección Mantenga el cordón alejado de las superficies calientes PrecauciónLongitud del cordón IntroducciónPor favor, léala cuidadosamente Herramientas necesariasEnsamblaje de la aspiradora Lista del contenido de la caja de cartónJK ML Clave DescripciónFilter Nut Float Power HeadEnsamblaje de un filtro de reemplazo Screw Ensamblaje del tambor y los pies de ruedecillaRemoción de la bolsa de almacenamiento de accesorios Instalación de la bolsa de almacenamiento de accesoriosDrum Ensamblaje de la aspiradora para mojado/secoIntroduzca la manguera Recogida de materiales secos con la aspiradora FuncionamientoDispositivo de soplado Funcionamiento continuaciónVaciado del tambor Traslado de la aspiradora para mojado/secoÁreaHosede Storage AccessoryEnrollado del cordón Mantenimiento VF5000 Reemplazo del filtro¿Qué filtro de reemplazo es adecuado para sus necesidades? AplicacionesDespués de Horas de usoPÓLENES promedio 500Regalo TarjetasSP6542 Manual del usuario Piezas de repuestoPida siempre por número de pieza -no por número de clave No. de Clave Pieza DescripciónSP6542 14 GallonSP 9/7/04 259 PM Notas Notas Emerson Professional Tools

WD1450 specifications

The RIDGID WD1450 is a high-performance wet/dry vacuum, designed to tackle a variety of cleaning tasks, whether in a workshop, garage, or home environment. With a powerful 14-gallon tank, this vacuum offers ample capacity to handle large debris and significant amounts of liquid, making it an ideal choice for both professionals and DIY enthusiasts.

One of the standout features of the RIDGID WD1450 is its impressive 6.0 peak horsepower motor. This robust engine provides vigorous suction power, allowing it to efficiently pick up everything from sawdust and dirt to larger debris and liquid spills. The vacuum’s performance is enhanced by a range of attachments, including a crevice tool, extension wands, and a general-purpose nozzle, enabling users to access tight spaces and tackle various cleaning jobs with ease.

The WD1450 incorporates a 2-stage filtration system that captures even the smallest particles, ensuring a cleaner environment. The foam sleeve filter is designed for wet use, preventing any damage to the motor when liquids are involved. In contrast, the pleated paper filter excels when handling dry debris, providing optimal airflow and suction while being easy to clean and maintain. This dual filtration system ensures versatility for different cleaning tasks.

Another significant characteristic of the WD1450 is its top handle and durable construction. The vacuum is designed with a sturdy plastic body, making it resilient and capable of withstanding tough working conditions. The integral top handle allows for convenient carrying, while the large wheels provide mobility across various surfaces, reducing strain during transportation.

Additionally, the WD1450 features a built-in drain valve, which simplifies the disposal of liquids - a key advantage for frequent wet cleaning tasks. This allows users to easily empty the tank without the need to tip it over, keeping the process efficient and mess-free.

The RIDGID WD1450 is not just about power and capacity; it also offers user-friendly features. The vacuum is equipped with a cord wrap and onboard storage for accessories, helping to keep the workspace organized. With its blend of strength, capacity, and thoughtful design, the RIDGID WD1450 wet/dry vacuum stands out as an essential tool for those seeking efficiency and effectiveness in their cleaning solutions.
Top Page Image Contents