Reliance Water Heaters 184735-000 instruction manual Element Cleaning / Replacement

Page 15

4.Remove the two wires attached to the thermostat.

5.Remove the thermostat from behind the thermostat bracket.

6.Disconnect wires from thermostat and slide out of the bracket.

7.Place the new lower thermostat in the bracket making sure it fits firmly against the tank.

8.Attach the wires to the new thermostat.

NOTE: Some of the terminals may require straight-in wiring through an eye-opening. If wires are now looped, recut and strip wire 3/8” to a straight length and insert.

9.Put plastic terminal cover back in place.

10.Fold back the insulation to cover the thermostat.

11.Replace outer door then turn the electric power on.

ELEMENT CLEANING / REPLACEMENT

To remove the element from the tank in order to clean or replace it:

1.Before beginning turn “OFF” the electric power supply to the water heater.

2.Turn off the water supply to the water heater at the water shut-off valve or water meter.

The water passing out of the drain valve may be extremely hot. To avoid being scald, make sure all connections are tight and that the water flow is directed away from any person.

4. Remove the two screws securing the outer door, and remove door.

FIGURE 16.

5. Open the flap of insulation to expose the opening.

FIGURE 17.

6.Lift out the tab as shown below to unclip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.

FIGURE 14.

3.Attach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain valve. Open a nearby hot water faucet which will relieve pressure in the water heater and speed draining.

FIGURE 15.

FIGURE 18.

7.Disconnect the two wires on the element and unscrew the old element from the tank.

FIGURE 19.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Residential Point of USE Electric Important Definitions Safe INSTALLATION, USE and ServiceGeneral Safety Introduction Table of ContentsMixing Valve Usage Typical InstallationInsulation Blankets Installing the NEW Water HeaterLocating the NEW Water Heater Facts to Consider about the LocationWater Piping TEMPERATURE-PRESSURE Relief Valve Filling the Water Heater Optional Cord SET Wiring 120 Volt and 240 Volt Wiring DiagramsWiring Temperature Adjustment Temperature RegulationOperational Conditions For Your InformationDraining Periodic MaintenanceTEMPERATURE-PRESSURE Relief Valve Operation Thermostat Removal / ReplacementElement Cleaning / Replacement Service Drain Valve Washer ReplacementLeakage Checkpoints Problem Cause Solution Troubleshooting GuidelinesRepair Parts List Point of USE Electric ModelsDrain PAN

184735-000 specifications

Reliance Water Heaters has established itself as a trusted name in the water heating industry, and the model 184735-000 is a testament to their commitment to delivering quality and efficiency. This water heater is designed to meet the needs of both residential and commercial users, providing reliable hot water supply for various applications.

One of the standout features of the Reliance 184735-000 is its significant storage capacity. With a tank that typically accommodates around 40 gallons, this model is ideal for households with moderate to high hot water usage. This capacity ensures that there is always enough hot water available for daily activities such as showering, washing dishes, and laundry.

The design of the Reliance 184735-000 incorporates advanced insulation technology, which minimizes heat loss. This feature enhances energy efficiency, allowing users to save on energy bills while ensuring optimal performance. The high-density foam insulation wrapped around the tank effectively reduces standby heat loss, making it an environmentally friendly choice.

Another notable characteristic of the 184735-000 is its user-friendly thermostat control. The intuitive dial allows users to easily adjust the water temperature according to preference and needs. This level of customization ensures comfort in hot water usage, whether for a relaxing bath or quick dishwashing.

The unit is also equipped with safety features such as a temperature and pressure relief valve. This mechanism releases excess pressure to prevent potential hazards, making it a reliable choice for peace of mind.

Reliance Water Heaters incorporates high-quality materials in the construction of the 184735-000. The tank is typically made of durable stainless steel or glass-lined steel, offering resistance against corrosion and extending the lifespan of the heater. Additionally, the heating elements are designed for efficient performance, ensuring rapid heating of water when required.

Installation of the Reliance 184735-000 is straightforward, with compatibility for various plumbing configurations. This versatility makes it a preferred option among homeowners and contractors alike.

In summary, the Reliance Water Heaters model 184735-000 combines efficiency, safety, and convenience. With its substantial storage capacity, energy-efficient design, and high-quality construction, it stands out as an excellent choice for anyone in need of a dependable water heating solution. Its user-friendly features further enhance its appeal, making it a noteworthy investment for reliable hot water availability.
Top Page Image Contents