Water Piping

FIGURE5.

3.Determine the location on the wall, and then the height above the floor which the wall securing bracket will be placed. Using adequate screws, or nuts, and bolts (not supplied) fasten the wall securing bracket to the wall.

FIGURE6.

HOTTER WATER CAN SCALD:

Water heaters are intended to produce hot water. Water heated to a temperature which will satisfy space heating, clothes washing, dish washing, cleaning and other sanitizing needs can scald and permanently injure you upon contact. Some people are more likely to be permanently injured by hot water than others. These include the elderly, children, the infirm, or physically/mentally handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain temperature water at the hot water tap, then you must take special precautions. In addition to using the lowest possible temperature setting that satisfies your hot water needs, a means such as a *mixing valve, shall be used at the hot water taps used by these people or at the water heater. Valves for reducing point of use temperature by mixing cold and hot water are also available.

Consult a Qualified Installer or Service Agency. Follow manufacturer’s instructions for installation of the valves. Before changing the factory setting on the thermostat, read the “Temperature Regulation” section in this manual.

This water heater shall not be connected to any heating systems or component(s) used with a non-potable water heating appliance.

Toxic chemicals, such as those used for boiler treatment shall not be introduced into this system.

Water supply systems may, because of such events as high line pressure, frequent cut-offs, the effects of water hammer among others, have installed devices such as pressure reducing valves, check valves, back flow preventers, etc. to control these types of problems. When these devices are not equipped with an internal by-pass, and no other measures are taken, the devices cause the water system to be closed. As water is heated, it expands (thermal expansion) and closed systems do not allow for the expansion of heated water.

The water within the water heater tank expands as it is heated and increases the pressure of the water system. If the relieving point of the water heater’s temperature-pressure relief valve is reached, the valve will relieve the excess pressure. The temperature-pressure relief valve is not intended for the constant relief of thermal expansion. This is an unacceptable condition and must be corrected. It is recommended that any devices installed which could create a closed system have a by-pass and/or the system have an expansion tank or device to relieve the pressure built by thermal expansion in the water system. Expansion tanks are available for ordering through a local plumbing contractor. Contact the local water supplier and/or a service agency for assistance in controlling these situations.

NOTE: To protect against untimely corrosion of hot and cold water fittings, it is strongly recommended that di-electric unions or couplings be installed on this water heater when connected to copper pipe.

184735-000 specifications

Reliance Water Heaters has established itself as a trusted name in the water heating industry, and the model 184735-000 is a testament to their commitment to delivering quality and efficiency. This water heater is designed to meet the needs of both residential and commercial users, providing reliable hot water supply for various applications.

One of the standout features of the Reliance 184735-000 is its significant storage capacity. With a tank that typically accommodates around 40 gallons, this model is ideal for households with moderate to high hot water usage. This capacity ensures that there is always enough hot water available for daily activities such as showering, washing dishes, and laundry.

The design of the Reliance 184735-000 incorporates advanced insulation technology, which minimizes heat loss. This feature enhances energy efficiency, allowing users to save on energy bills while ensuring optimal performance. The high-density foam insulation wrapped around the tank effectively reduces standby heat loss, making it an environmentally friendly choice.

Another notable characteristic of the 184735-000 is its user-friendly thermostat control. The intuitive dial allows users to easily adjust the water temperature according to preference and needs. This level of customization ensures comfort in hot water usage, whether for a relaxing bath or quick dishwashing.

The unit is also equipped with safety features such as a temperature and pressure relief valve. This mechanism releases excess pressure to prevent potential hazards, making it a reliable choice for peace of mind.

Reliance Water Heaters incorporates high-quality materials in the construction of the 184735-000. The tank is typically made of durable stainless steel or glass-lined steel, offering resistance against corrosion and extending the lifespan of the heater. Additionally, the heating elements are designed for efficient performance, ensuring rapid heating of water when required.

Installation of the Reliance 184735-000 is straightforward, with compatibility for various plumbing configurations. This versatility makes it a preferred option among homeowners and contractors alike.

In summary, the Reliance Water Heaters model 184735-000 combines efficiency, safety, and convenience. With its substantial storage capacity, energy-efficient design, and high-quality construction, it stands out as an excellent choice for anyone in need of a dependable water heating solution. Its user-friendly features further enhance its appeal, making it a noteworthy investment for reliable hot water availability.