QHT Boiler manual Recommended Minimum Clearances

Page 17

Transporting

Once the packaging has been removed, cut the straps and remove the casing in such a way as to avoid damaging it.

∙If hoisting equipment is available, suitable for the weight of the boiler, use the eyebolts (1) provided on the body to lift it

∙If no suitable hoisting equipment is available, handle the boiler manually, as follows:

∙Remove the fastening screws (2) for the baseboard (3) and take it off, so as to allow the pallet to be tilted

∙Insert a suitably sized bar through the two eyebolts (4) and lift the boiler body.

WARNING

∙Use safety equipment.

∙Must be Installed on non combustible floor or cinder blocks extending at least 16" in front and 8" on either side of the 3 WOOD.

∙Construction of cement block pad under 3WOOD should extend at least 8” to each side of the boiler and extend at least 2” on either side of the chimney connector

CAUTION

The room where the 3WOOD Boiler is installed must be heated and must always comply with the technical standards and the local codes.

Allow for the space required to access the safety / control devices and to perform the maintenance and loading operations.

∙Do Not install the 3WOOD appliances:

∙Outdoors, as they are not designed for this type of installation.

∙In an unheated room.

∙In rooms with exhaust fans.

∙In houses with heat recovery ventilation systems. (HRV) with out having a outside source of ventilation air for the boiler room.

17

Recommended

Minimum Clearances

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 3Wood Cast Iron Boiler Page Table of Contents Important Information Page Identification Procedure in Event of Power Failure Refueling the Boiler Wood Burning Wood Storage Procedure in the event of a runaway fire or chimney fire Chimney Construction Chimney CleaningCoal Fire Technology with 3 Pass 3WOOD DesignInstallation considerations Layout of the Main Components Recommended Minimum Clearances No Galvanized Pipe Assembling the Casing Installation of Controls Installation of Flue Gas Partition Installation of Draft RegulatorChain must be exactly 32 inches long Or the handle Commissioning the 3WOOD Boiler3WOOD boiler piping and wiring Considerations Piping Notes 3Wood installed in combination with a oil/gas boilerPage Way Mixing Valve Piping Page Boiler Parallel Piping Page Page 59200628,59200629 Page Page Shutdown Troubleshooting System Checkout Warranty for Biasi 3WOOD Residential Cast-Iron Water Boilers Biasi S.p.A Verona, Italy

Boiler specifications

The QHT Boiler is an advanced heating solution designed for both residential and commercial applications. Known for its efficiency and innovative technology, the QHT Boiler has rapidly gained recognition in the industry for its unique features and superior performance.

One of the main characteristics of the QHT Boiler is its high-efficiency rating. Utilizing cutting-edge technology, the boiler operates at a remarkably high thermal efficiency, which not only reduces energy consumption but also lowers operational costs for users. This efficiency is achieved through smart design and effective heat exchange systems that ensure maximum utilization of fuel.

Another notable feature of the QHT Boiler is its compact and space-saving design. Many models are engineered to be installed in tight spaces while still delivering powerful heating capabilities. This is especially valuable in urban environments where space is at a premium. The boiler’s sleek design also ensures that it can blend seamlessly with modern home aesthetics.

In terms of technology, the QHT Boiler incorporates advanced control systems that allow for precision temperature management. Users can easily set and adjust the desired temperatures through an intuitive interface, whether via a digital display or a mobile application. This flexibility ensures that heating needs are met efficiently, providing comfort without excess energy use.

Durability and reliability are key characteristics of the QHT Boiler. Constructed from high-quality materials, the boiler is designed to withstand the rigors of daily operation while minimizing the need for maintenance. This reliability is crucial for both homeowners and businesses, as it translates to reduced downtime and long-term cost savings.

Sustainability is another critical focus of the QHT Boiler’s design. Many models are compatible with renewable energy sources, including solar thermal systems, allowing users to reduce their carbon footprint. The incorporation of features like modulating burners helps to adjust the combustion process to varying heat demands, resulting in lower emissions.

Safety features are also paramount in the QHT Boiler’s design. It includes multiple safety mechanisms such as pressure relief valves and flame detection sensors to ensure safe operation. These features provide peace of mind to users, knowing that the boiler operates within safe parameters.

In summary, the QHT Boiler represents a fusion of efficiency, advanced technology, and user-friendly design, making it a top choice for heating solutions. With its compact size, high-efficiency rating, innovative control systems, and commitment to sustainability, the QHT Boiler stands out as a modern solution for diverse heating needs. Whether for residential or commercial use, it meets the demands of today’s energy-conscious consumers.
Top Page Image Contents