Location Selection, For left to right airflow

Installation

For Qualified HVAC

Installer Only

LOCATION SELECTION

Remember to select a location that is readily accessible for periodic inspection and cleaning of the the Pre- filters and Ionizing-Collecting Cells. Allow a minimum of 24” clearance in front and 12” clearance above the air cleaner for component removal and service space.

DIRECTION OF AIRFLOW THROUGH THE AIR CLEANER

For left to right airflow:

This air cleaner is factory set for left to right airflow when you are facing the Front Panel Assembly.

For right to left airflow:

1.Remove the Pre-filters and Ionizing Collecting Cells from the cabinet. A plastic positioning spacer is located inside the bottom of the cabinet. This spacer is secured to the cabinet by a #6 Phillips drive screw to assure installation of the Cells in the correct position with respect to air flow.

2.Remove the screw and reposition the spacer in the alternate hole in the bottom of the cabinet.

3.Replace the screw to ensure the plastic spacer is not accidentally dislodged during normal maintenance. The spacer must be installed in the hole provided nearest to the air leaving side of the cabinet.

4.Remove the Ionizing-Collecting Cell handle and re-attach to the opposite end of the cell(s). Turn Cells around, reversing their orientation and replace in cabinet and replace Pre-filters on the air entering side of the air cleaner. The directional arrows on the cell end plates must point in the direction of airflow.

Installation

For Qualified HVAC

Installer Only

The following section is to be used by a qualified HVAC

contractor or installer ONLY.

These procedures are not to be attempted by any person not qualified to work with high voltage or familiar with the installation of this type of air cleaner. Seller cannot be held responsible for any injury or damage by any person not qualified to install this product.

INSTALLER HELP LINE

If you have any questions on installation issues or problems, please call

Technical Support 866-829-2440

Technical Specifications


Model	HE Plus 1400	HE Plus 1400	HE Plus 2000

Size	(16x25)	(20x20)	(20x25)

Part Number 120V/50-60Hz	455601-001	455603-001	455600-001

Part Number 240V/50-60Hz	455601-010	455603-010	455600-010

Maximum Rated Airflow	1400 CFM (2380m/hr)	1400 CFM (2380m/hr)	2000 CFM (3400m/hr)

Maximum Pressure Drop	.11 inch w.g. @1400 CFM	.11 inch w.g. @1400 CFM	.14 inch w.g. @2000 CFM

Cell Weight	10 lbs ea. (4.5 kg)	9 lbs ea. (4.1 kg)	12 lbs ea. (5.5 kg)
(2 Cells in ea. unit)

Unit Weight	32 lbs. (14.6 kg)	36 lbs. (16.4 kg)	36 lbs. (16.4 kg)

Maximum Power	40 watts	40 watts	48 watts
Consumption

Electrical Output	2.5 MADC @ 6200 VDC	2.5 MADC @ 6200 VDC	3.2 MADC @ 6200 VDC

Classification	UL/CE	UL/CE	UL/CE

Optional Accessories	Charcoal After Filter	Charcoal After Filter	Charcoal After Filter