Uniden TRUC56 Call Waiting Deluxe Features, Press SELECT/CH. You will hear a confirmation tone

•To activate features, select “CW Deluxe On” in the Caller ID setup. See page 15.

•You can also answer a waiting call immediately by pressing TALK/FLASH, the first caller will be placed on hold. To return to the original caller, press TALK/FLASH again.

3)Press SELECT/CH. You will hear a confirmation tone.

•You cannot store a Caller ID message in the phonebook if a phone number does not appear in the message.

•You cannot set the Distinctive Ring or Speed dial in this step. If you would like to set these options, edit the stored data.

•Even if the memory locations are full, the message will be stored in the Phonebook, however, the message will be erased from the Caller ID List.

•If data is already stored in the RocketDial, the old data will be overwritten by the new data.

Call Waiting Deluxe Features

Your TRUc56 series gives you new options for Call Waiting. At the touch of a button, you can place the caller on hold, send them to your voice mail service, or conference them into your current call. You may be required to subscribe to Call Waiting and Call Waiting Deluxe to use these features. Not all features are available in all areas. Check with your local telephone company for details.

1)When you receive a Call Waiting call, press MENU/MUTE for a list of options.

2)Press UP or DOWN, or the number keypad (1-7) to select an option. For example:

Your TRUc56 series is pre-programmed with seven call waiting options. You may select to ask the calling party to hold, send them a busy message, forward them to your voice mail, or answer and drop the first caller. You may also select to conference them into the current call or, at any time, choose to drop the first or drop the last caller.

Check with your local telephone company for a full list of options.