Register the Security Code
1)Unplug the AC adapter.
2)Press and hold PAGE on the base, while you plug in the AC Adapter, hold PAGE until the status LED on the base flashes.
3)Press TALK/FLASH. “Handset Registering” appears.
When the registration operation is finished “Registration Complete” appears and the status LED is no longer illuminated. You will hear a confirmation tone and the phone returns to the standby mode.
• You must complete the registration operation within 30 seconds, or the phone returns to the standby mode.
• During the registration operation, you cannot receive an incoming call, page, or make a call.
If you have a second handset (TXC400)
You need to perform the following steps:
1)
2)Register the TXC400 to the TRUc56 base (For instructions, see “Registering the Second Handset” on page 41).
Installing the Holster
• Line up the groove on the back of the handset with the groove on the holster. It fits in the holster only one way.
• Slide the phone into the holster.
• Use the spring clip to attach the holster to your belt or pocket.
When you charge the handset, remove the holster if it is attached.
ADDITIONAL
INFORMATION