![](/images/new-backgrounds/1013241/1324113x1.webp)
Step 1 Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery pack connector
with the | BLACK |
RED | |
correct polarity. | BLACK |
RED | |
| noir |
rouge
1
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack.
TO SELECT CALLER ID OPTIONS
Press MENU/MUTE.
Press UP or DOWN to move the pointer to “Caller ID Setup”, then press SELECT/CH.
Press UP or DOWN to move the pointer to an option, then press SELECT/CH.
Press UP or DOWN to change the option setting.
Step 4 Installing the Headset
To make or receive a call, you must install the headset.
Wear the headset.
Q U I C K R E
Insert the battery pack into the battery compartment.
Replace the cover.
2
Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Setting up the phone, Choose the dialing mode” in your owner’s manual.
Press SELECT/CH and return the handset to the base.
TO CHOOSE THE LANGUAGE
Press MENU/MUTE.
F E R
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and then to a 120V AC outlet.
Place the handset in the base.
You must charge the battery pack Note: continuously for
using the phone.
Step 3 Setting up the Caller ID Options/Language
Note: Three Caller ID options
are available: Auto Talk, Caller ID on Call Waiting (CIDCW) and Area Code.
Press UP or DOWN to move the pointer to “Language”, then press SELECT/CH.
Press UP or DOWN to change the option setting.
Press SELECT/CH and return the handset to the base.
Plug the headset cord into the jack on the top of the handset.
E N C E G U I D E