Utica PEG-C installation manual Safety Symbols, Read ALL Instructions Before Installing

Page 3

Safety Symbols

The following defined symbols are used throughout this manual to notify the reader of potential hazards of varying risk levels.

DANGER

DANGER - Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING

WARNING - Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury

CAUTION

CAUTION - Indicates a potential hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

IMPORTANT!

READ ALL INSTRUCTIONS BEFORE INSTALLING.

WARNING:

1.Keep boiler area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

2.DO NOT obstruct air openings to the boiler room.

3.Modification, substitution or elimination of factory equipped, supplied or specified components may result in property damage, personal injury or the loss of life.

4.To the owner: Installation and service of this boiler must be performed by a qualified installer.

5.To the installer: Leave all instructions with the boiler for future reference.

6.When this product is installed in the Commonwealth of Massachusetts the installation must be performed by a Licensed Plumber or Licensed Gas Fitter.

WARNING:

ALL INSTALLATIONS OF BOILERS AND VENTING

SHOULD BE DONE ONLY BY A QUALIFIED EXPERT AND IN ACCORDANCE WITH THE APPROPRIATE UTICA BOILERS MANUAL. INSTALLING OR VENTING A BOILER OR ANY OTHER GAS APPLIANCE WITH IMPROPER METHODS OR MATERIALS MAY RESULT IN SERIOUS INJURY OR DEATH DUE TO FIRE OR TO ASPHYXIATION FROM POISONOUS GASES SUCH AS CARBON MONOXIDE WHICH IS ODORLESS AND INVISIBLE.

PAGE 1

Image 3
Contents PEG-C Table of Contents Read ALL Instructions Before Installing Safety SymbolsInstallation Procedure Ventilation & Combustion AIR Page Connecting Supply and Return Piping Page Vent Installation Vent System Modification Vent Damper Installation Instructions InstallationInstructions Connecting GAS Service Electrical WiringSee Addendum a for Wiring Diagrams and Component Coding Thermostat Installation For Your Safety Read Before OperatingLighting Instructions Operating Instructions for Intermittent Pilot Systems To Turn OFF GAS to Appliance Lighting Instructions for Continuous Pilot SystemNormal Sequence of Operation Connecting Supply Return PIPING, Water Chilled Medium General Instructions Discharge will be Boiling HOT Water and SteamWill be Boiling HOT Water Water will be Boiling HOT To Clean the Boiler FluewaysWater will be Boiling HOT Using Cleaning Compound Skimming OFF ImpuritiesBlowing Down Boiler Page 24VOLT Spark PEG-C Replacement Parts PilotManifold PEG300C PEG-C Replacement Parts BaseSide Panel Right ALL PEG-C Replacement Parts JacketsWash 5/16 Flat STL ZP PEG-C Replacement Parts Heat ExchangerPEG-C Replacement Parts Front Panel Controls PEG-C Replacement Parts Electrical Natural GAS Steam Boilers RATINGS, DATA, and Dimensions

PEG-C specifications

Utica PEG-C, a modern combination of both technology and innovation, has emerged as a solution tailored for those seeking efficient heating solutions in residential and commercial spaces. Standing out in the market, this high-performance boiler is designed not only to optimize heating efficiency but also to enhance user comfort and convenience.

At the core of the Utica PEG-C is its advanced cast iron construction, which ensures durability and longevity. The cast iron heat exchangers play a crucial role in maximizing heat transfer while minimizing energy losses. This design is pivotal in meeting energy efficiency standards, making it an eco-friendly choice in today’s environmentally conscious world.

One of the standout features of the Utica PEG-C is its automated combustion control system. This state-of-the-art technology allows for precise regulation of the burner operation, ensuring that fuel usage is minimized without compromising on heat output. Consequently, users can expect reduced utility bills with increased comfort levels in their living or working environments.

The PEG-C series also offers a range of input capabilities, making it suitable for various applications, from small homes to larger commercial buildings. The flexibility in sizing ensures that customers can select a unit that efficiently matches their heating requirements. Moreover, the integrated smart controls further enhance operational efficiency by adjusting the heating output based on real-time temperature readings.

Safety is paramount in any heating system, and Utica PEG-C does not fall short in this regard. It features an array of safety mechanisms, including an automatic water fill, pressure relief valves, and flame rollout switches. These features guarantee safe operation, providing peace of mind to users.

Additionally, the PEG-C series offers compatibility with a range of heating options, including hydronic baseboard systems, radiant floors, and indirect water heaters, making it a versatile choice for many heating applications.

In summary, the Utica PEG-C combines robust engineering, cutting-edge technology, and a commitment to efficiency and safety. With its durable construction, intelligent control systems, and adaptability to various heating needs, it's a wise investment for anyone looking to enhance their heating systems whether in a residential or commercial context.