Saab 9-3 M03 installation instructions 12 788

Page 16

16

12 788 928

 

 

 

 

62

62

61

64

 

62

 

 

 

 

63

 

 

 

 

69

 

 

 

63

F920A023

61Fit the heat shield to the turbo compressor (two screws and a catch).

62Fit the turbo intake pipe and then connect to the pipe the small hose from the control valve (APC valve) and the hose from the carbon filter vent valve.

63Fit the air filter cover and plug the connector into the air mass sensor. Attach the hose to the air fil- ter cover (if such a hose is fitted).

64Fill with coolant and check the system for leaks. Fit the expansion tank cap.

65Connect the negative battery cable.

66Connect the diagnostic tool, select car and mod- el year, select “All”, select “Add/Remove”, select the accessory and then “Add”.

67Bleed the cooling system in the following way:

Note

The A/C or ACC should be turned OFF.

Fill the coolant system to the MAX level. Close the expansion tank cap. Start the engine and run at varying engine speeds until the radiator fan cuts in. Carefully open the expansion tank cap and top up to the MAX level. Close the cap. Switch off the engine and if necessary top the coolant up to the MAX level.

68Start the heater by pushing the "CUSTOMIZE" button on the SIDC, select "Parking heater", push "SET", select "Manual control", push “SET”, select “Heater on”, push “SET” and check that the heater starts ( it has a delay of about 1 minute). If necessary top up the cooling system (engine switched off).

69Fit the cover over the bulkhead space, fit the bonnet seal and the wiper arms.

70Adjust the clock/date.

71Programme the heater Turn the ignition switch to the ON position, push the "CUSTOMIZE" but- ton on the SIDC, select "Parking heater", push "SET", select "Manual control" and check that the heater starts or select "Timer setting", "Tim- er”, select a timer; “A”, “B” or “C”, programme in a suitable time and push “SET”. Check that the heater starts at the programmed time.

Select “Manual control", press “SET”, select “Heater off”, press “SET” and check that the heater stops. Select “Back”, press “SET”, select “Finish” and press “SET”.

Saab 9-3 M03-

Page 15 Page 16
Image 16
Page 15 Page 16
Contents Saab 9-3 M03 Engine/cabin heater12 788 Heater mounting kit12 788 928 Electrical connection kit 12 788 928 Reduction of fuel pressure Emptying the fuel tankF920A014 Tightening torque 4 Nm 3 lbf ft Tightening torque 24 Nm 18 lbf ftFit the heater mounting bracket to the bulkhead 10 12 788 Tightening torque 9 Nm 6.5 lbf ft38 38 38 12 12 788 4343F920A020 14 12 788 Tightening torque 5 Nm 3.5 lbf ft Tightening torque 22 Nm 16.5 lbf ft12 788

9-3 M03 specifications

The Saab 9-3 M03, introduced in 2003, is a compact executive car that reflects the Swedish automaker's legacy of innovation, design, and performance. Built on the GM Epsilon platform, the 9-3 M03 emerged as a versatile contender in its segment, blending sporty characteristics with everyday practicality.

One of the standout features of the Saab 9-3 M03 is its distinctive design. The car boasts sleek lines and an aerodynamic profile that enhances both its aesthetic appeal and fuel efficiency. The front of the vehicle is characterized by the iconic Saab grille, complemented by sharp headlights that contribute to its aggressive demeanor. Additionally, the hatchback and sedan variants offer different styling options, catering to a range of consumer preferences.

Under the hood, the 9-3 M03 offers a variety of engine options, including 1.8T, 2.0T, and 2.8 V6 turbocharged engines. The 1.8-liter engine produces a robust 150 hp, providing a balanced blend of performance and fuel economy. The 2.0-liter engine, available in both naturally aspirated and turbocharged versions, delivers 175 hp and 210 hp respectively, while the powerful 2.8 V6 turbo offers an exhilarating 250 hp. With power being efficiently transmitted through either a six-speed manual or a five-speed automatic transmission, drivers can expect a dynamic and engaging driving experience.

Technologically, the Saab 9-3 M03 is equipped with advanced features that enhance both safety and comfort. It includes an innovative Saab Active Head Restraint system that significantly reduces the risk of whiplash injuries. The vehicle is also equipped with electronic stability control, anti-lock brakes, and a comprehensive airbag system, ensuring a high level of occupant protection.

In terms of interior comfort, the 9-3 M03 is a model of ergonomic design. The cockpit is driver-focused, with easy-to-reach controls and a layout that promotes a stress-free driving experience. High-quality materials and an array of customization options allow for a tailored ambiance. The sound system, featuring options from premium brands, ensures an enjoyable ride.

The 9-3 M03 successfully embodies Saab's philosophy of combining performance with practicality, while offering a range of features that cater to a diverse audience. It stands as a unique offering in the compact executive car market, effectively appealing to those who appreciate Scandinavian design and engineering excellence.
Top Page Image Contents