HOW TO MAINTAIN (continued)
NOTE: Turn off the switch and unplug the electrical cord before servicing the cleaner. Never operate the vacuum cleaner without the dust bag or filters.
FILTERS
The filters should be checked at each disposable dust bag change. If the filters are dirty, clean or replace for maximum performance of your cleaner.
1Motor Filter
The motor filter is located below the dust bag inside the bag compartment. Remove the front cover. Take the dust bag out to check the motor filter. If the motor filter is dirty, remove and clean or replace with a new filter.
To clean the motor filter, brush the debris off into a trash bin or vacuum with another vacuum cleaner.
2Exhaust Filter
The exhaust filter is located behind the dust filter grille below the bag compartment.
Remove the front cover. (The front cover has to be removed first to enable removal of exhaust grille.) Lift up on exhaust grille handle to remove. The filter is attached to the back of the grille. If the exhaust filter is dirty, remove and clean or replace with a new filter.
To clean the exhaust filter, brush the debris off into a trash bin or vacuum with another vacuum cleaner.
To replace the exhaust filter, tuck the bottom of the filter behind the two filter retainers at the bottom of the exhaust grille. Then place the top of the filter behind the two filter retainers at the top of the grille. Press the filter down on narrow pegs in the center of the grille. Replace the grille on the cleaner and replace the front cover.
Front Cover
Upper Filter
1 Retainers
2
Lower
Filter
Retainers
Exhaust
Grille
Handle
Look for the
GENUINE
EUREKA PRODUCT
symbol.
11