Sanitaire SC785 SERIES warranty Handle Collapse Button, Handle Release Pedal

HOW TO USE

4 Cord Retainer

When preparing to use vacuum, firmly push the electrical cord down into the cord retainer. This will place the electrical cord out

4 CORD of the way while you vacuum.

RETAINER

5	HANDLE	5 Handle Collapse Button
	COLLAPSE	To collapse the handle from the
	BUTTON	upright position, press handle
		collapse button, rotate handle
	CORD	down until latch in hand grip
6		locks onto the body.
	STORAGE
	HOOKS

HANDLE

7 RELEASE PEDAL

8 RESET BUTTON

9

RESET

LIGHT

7Handle Release Pedal

6Cord Storage Hooks

This unit has two convenient cord storage hooks attached to the handle. Wind the cord around the hooks and fasten the plug to the cord to prevent unwinding.

The handle release pedal is located next to the floor between the two wheels on the back of the cleaner. Step on the handle release pedal and pull back handle to find a comfortable operating position. Handle will automatically lock into storage position when handle is rotated into upright position.

8Reset Button

This unit uses a cogged, non-stretch belt. If a large object causes the brush roll to jam, the brush roll motor shuts off and the Reset Light illuminates. Turn off and unplug the unit. Check the brush roll for debris and clean if needed. Press the reset button, plug in the unit and turn on to continue cleaning.

9Reset Light

The reset light is a LED light that illuminates when the brush roll jams. See reset button above for actions to take when this light comes on.

8