Clog Removal, Clogs in the Head or Brush Figure

CLOG REMOVAL

Always switch off power and unplug vacuum from outlet ! before removing any clogs!

NOTE! D4 users with ET-1, ET-2 or DISCO power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head.

If the “bag full or clog” warning indicator (12) remains orange after the filter bag has been changed and the filters are in good condition, there is likely a clog in the sys- tem.

Clogs in the Head or Brush - Figure 34

Clogs in the swivel neck (63) of a head or brush can be cleared by first pressing the tool release button (9) and removing the brush or head. Check inside the swivel neck chan- nel (64), and clean out pathway.

Clogs in the Telescopic Tube - Figure 35

Remove head from telescopic tube (5) by pushing the tool release button (9) and pulling the tube out. Remove the handle grip (1) from the top of the telescopic tube by pushing the handle grip release button (3). A stiff wire or stick can be used to push the clog out of the tube.

Clogs in the Hose - Figures 35, 36, 37 & 38

Check for suction at the end of the hose by removing the handle grip (1) from the tele- scopic tube (5) and putting your hand over the handle grip suction opening (65). Turn the power on and slide the suction up to full power. If you feel reduced suction, the blockage is in the hose.

If the blockage is in the hose, there are two ways to clear it:

1.With the telescopic tube disconnected from the handle grip (1), hold the hose upright with one hand blocking the handle grip suction opening (65) and switch on the machine with full suction power. If necessary, quickly lift your hand on and off the end of the hose. If that does not clear the clog, you may also clear clogs by reversing the hose - see #2 below.

2.With the power off, remove the hose neck (#14, figure 36) from the suction opening (19) by squeezing the two release buttons (13). Remove the handle grip (1) from the tel- escopic tube (figure 37) and insert the handle end of the hose (1) into the suction open- ing (figure 38). Note: the handle will not fit snugly into the suction opening. Then, hold the hose upright with one hand blocking the hose neck end and switch on the machine at full suction power. If necessary, quickly lift your hand on and off the neck end of the hose (figure 38). After the clog is removed, replace the hose in the correct position.

Note! Do not insert a wire or stick into the hose. Doing so may cause damage to the hose.

Clogs in Entrance to Filter Bag - Figure 39

Remove hose neck (14) from vacuum cleaner(see figure 36), open the filter bag cover (see page 11) and clean out entrance to bag (66).

Figure 34

1	1
	1
65	3
	3
3	11
3
5
	5
	9

Figure 35

14 13

19	5
Figure 36	Figure 37

Figure 38

Figure 39

Airbelt D specifications

The Sebo Airbelt D is a high-performance vacuum cleaner known for its exceptional cleaning efficiency, robust design, and user-friendly features. Specially engineered for both home and professional cleaning environments, the Airbelt D offers a combination of powerful suction and advanced filtration, making it a popular choice among consumers.

One of the standout features of the Sebo Airbelt D is its impressive suction power. The vacuum is equipped with an efficient motor that delivers strong airflow, which helps in picking up dirt, dust, and pet hair from various surfaces, including carpets, hard floors, and upholstery. The Airbelt D is designed to clean both low-pile and high-pile carpets effectively, ensuring a thorough clean across all flooring types.

A notable characteristic of the Sebo Airbelt D is its Airbelt technology. The vacuum's unique bumper system consists of a soft, cushioned material encircling the machine, protecting furniture and walls from scratches and damage when maneuvering around corners and obstacles. This feature enhances the vacuum's usability while maintaining the integrity of the surrounding environment.

The Sebo Airbelt D also incorporates a high filtration system, featuring a hospital-grade microfilter and a pre-motor filter. This ensures that 99.9% of allergens and particles as small as 0.3 microns are captured, providing cleaner air and making it an excellent choice for allergy sufferers. The vacuum's design allows for easy maintenance and filter replacement, ensuring optimum performance over time.

Users will appreciate the ergonomic design of the Sebo Airbelt D, which includes a comfortable handle and a flexible hose that extends easily for reaching difficult areas such as stairs or under furniture. The vacuum also features a variety of attachments, including a crevice tool, upholstery nozzle, and a dusting brush, allowing for versatile cleaning tasks throughout the home or office.

With a range of onboard tools and a long power cord, the Sebo Airbelt D provides extended cleaning reach, reducing the need to frequently switch outlets during cleaning. Its durable construction is designed for longevity, making it a worthwhile investment for anyone seeking a reliable vacuum cleaner.

In summary, the Sebo Airbelt D combines powerful suction, advanced filtration technology, and user-friendly features in a robust and versatile design, making it an exceptional choice for those looking to achieve superior cleaning results across a variety of surfaces while maintaining a healthier indoor environment.