Sherwood EF-3 BAYI Pellet Quality is Important Please Read the Following, I. Pellet Standards

Page 4

PELLET QUALITY IS IMPORTANT,

PLEASE READ THE FOLLOWING PAGE

Your pellet stove has been designed to burn wood pellets only. Since there are many manufacturers of wood pellets it is important to select pellets that are free of dirt or any impurities. The Pellet Fuel Industries (P.F.I.) has established standards for wood pellet manufactures. We recommend the use of pellets that meet or exceed these standards. Ask your dealer for a recommended pellet type.

THE PERFORMANCE OF YOUR PELLET STOVE IS GREATLY EFFECTED BY THE TYPE AND QUALITY OF WOOD PELLETS BEING BURNED. AS THE HEAT OUTPUT OF VARIOUS QUALITY WOOD PELLETS DIFFER, SO WILL THE PERFORMANCE AND HEAT OUTPUT OF THE PELLET STOVE.

Since Sherwood Industries Ltd. has no control over the quality of pellets that you use, we assume no liability caused by the quality of wood pellets used.

P.F.I. PELLET STANDARDS:

 

Fines

1% maximum through a 1/8” screen

Bulk Density

40 lbs. per cubic foot minimum

Size

1/4” to 3/8” diameter 1 – 1.5” long maximum

Ash Content

1% maximum

Moisture Content

8% maximum

Heat Content

approximately 8200 Btu per lb. minimum

Check the burn-pot liner periodically to ensure that the holes are not blocked with clinkers, (clinkers are silica in the fuel that form a hard mass during the burning process). If they are blocked, remove the liner (when the unit is cold) and clean the clinkers out. The liner should be cleaned or scraped once every 2-3 days depending on wood pellet quality. Clean the holes in the lines with a small pointed object.

Store pellets at least 36” (1 m) away from the pellet stove.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Owners Technical Manual Envirofire Installation Manual InstallationImportant Safety Data USE of Cordwood is Prohibited by LAWPellet Quality is Important Please Read the Following I. Pellet StandardsAutomatic Safety Features of Your Pellet Stove HOW to Start and Operate Your Pellet Appliance Auger Light START-UP Switch DIAL-A-FIRE Heat Output KnobTurning Your Pellet Stove OFF Convection Blower Speed ControlSLIDER/DAMPER Installation /OPERATION Instructions InstallationOperation On LOWAreas for Routine Inspection ASH PAN and Door GasketsBurner POT and Liner Freestanding ASH PANPost Season CLEAN-UP Door GlassFresh AIR Intake Inside FireboxElectrical Component Functions 11 F 71C Temperature Sensor 12 F 60C N/O Temperature Sensor SHUT-DOWN Sensor13 F 49C N/C Temperature Sensor Ignitor Shut Down Sensor Vacuum SwitchDeciding Where to Locate Your Pellet Appliance Vent Termination RequirementsFireplace Dimensions Removing Your NEW Stove from IT’S PalletClearance to Combustibles Masonry Fireplace Insert INSTALLATION, Model FPIFireplace Insert Size Standard Assembling the Face Plate for the FPI and BIH ModelsBuilt Recommended Framing for Built in Heater Built in Heater Clearances to CombustiblesFreestanding INSTALLATION, Models FS Clearances to Combustibles FreestandingPedestal Installation Model FS Freestanding InstallationInstallation Keyholes Here Horizontal Exhaust Through the Wall Through Wall Installation Freestanding Inside Vertical Installation Freestanding Outside Vertical Installation Mobile Home Installation Outside Fresh AIR ConnectionsTroubleshooting TroubleshootingDo not Page Potentiometer Readings Wiring Diagram Warranty For the do-it-yourself Individual

EF-3 BAYI specifications

The Sherwood EF-3 BAYI is a remarkable integrated amplifier that stands out in the realm of audio equipment, delivering exceptional sound quality coupled with advanced technology. Renowned for its robust build and powerful performance, the EF-3 BAYI is designed both for audiophiles and casual listeners looking to elevate their audio experience.

At the heart of the Sherwood EF-3 BAYI is its high-fidelity amplification system, capable of delivering an impressive output power to drive various speaker configurations. The amplifier is engineered to produce a clean, dynamic sound that maintains clarity even at higher volume levels. Its audio performance is enhanced by advanced circuitry that minimizes distortion and ensures a natural, balanced sound across a wide frequency range.

One of the standout features of the EF-3 BAYI is its Class AB amplification technology. This design offers the best of both worlds, combining the efficiency of Class D amplification with the superior sound quality typically associated with Class A designs. This results in an amplifier that not only conserves energy but also offers a warm and engaging listening experience that appeals to critical listeners.

Additionally, the EF-3 BAYI is equipped with multiple input options, including analog RCA inputs, digital coaxial, and optical inputs, allowing users to connect a variety of audio sources. Furthermore, its built-in Bluetooth functionality enables wireless streaming from smartphones, tablets, and other Bluetooth-enabled devices, making it versatile and convenient for modern-day listening habits.

The amplifier's user-friendly interface includes clearly labeled knobs and buttons for adjusting volume, treble, and bass, empowering users to tailor the audio output to their preferences. Moreover, the sleek and contemporary design of the EF-3 BAYI ensures that it fits seamlessly into any home audio setup, making it not just an audio powerhouse but also an aesthetically pleasing addition.

Overall, the Sherwood EF-3 BAYI integrated amplifier exemplifies what modern audio technology can achieve, combining robust performance with advanced features, making it a top choice for anyone looking to enhance their auditory experience. Whether for music, movies, or gaming, the EF-3 BAYI stands ready to deliver exceptional sound quality that truly brings content to life.
Top Page Image Contents