Door Glass, Fresh AIR Intake, Inside Firebox

DOOR GLASS

(It is recommended that your dealer replace the glass if broken.)

The door glass is made of 5 mm thick, high temperature PYROCERAMIC The center panel is 229 mm x 330 mm. To replace the glass, unscrew and remove the four glass retainers. Remove the glass and any broken pieces. High temperature fiberglass tape should be used around the glass. Replace the glass, center the glass assembly in the frame, then screw the glass retainers back to the frame. The use of substitute materials is prohibited.

FRESH AIR INTAKE

Inspect periodically to be sure that it is not clogged with any foreign materials.

INSIDE FIREBOX

For bi-weekly clean out, ash may be removed from behind the steel plates by rotating the circular cover to allow vacuuming behind the plates.

Removal of the fire box backing for bi-annual cleaning

-Remove the top baffle.

-Lubricate and then remove the 7 screws that hold the brick liner in place. Tilt the top of the brick panel towards the firebox opening and remove from the firebox

-Remove the top rod by first removing the screw that holds it in place, then slide the rod sideways

-Pull the side panels into the center of the firebox, then out

-Pull the center panel out

-Clean all passages thoroughly

Installation of fire box backing:

-Install the side panels in place. Insert center panel, hold the panels in place

-Install the top rod by sliding it into one side panel then across into the other panel. Screw rod in place.

-Re-install steel brick liner and screw in place.

-Replace top baffle

EXHAUST VENT

Soot and Flyash: Formation and Need for Removal: - The products of combustion will contain small particles of flyash. The flyash will collect in the exhaust venting system and restrict the flow of the flue gases. Incomplete combustion, such as occurs during startup, shutdown, or incorrect operation of the room heater will lead to some soot formation which will collect in the exhaust venting system. The exhaust venting system should be inspected at least once every year or after two tons of pellets to determine if cleaning is necessary. We recommend contacting your dealer for professional cleaning. To remove dust from the vent pipe, tap lightly on the pipe to dislodge any loose ash. Open the bottom of the ”T” to dump the ash, then vacuum as much of the ash out of the vent pipe as possible.

HEAT EXCHANGER TUBES

This cleaning rod is to be pulled back and forth a few times (ONLY WHEN THE UNIT IS COLD) in order to clean away any fly ash that may have collected on the heat exchanger tubes. As different types of pellets produce different amounts of ash, cleaning of the tubes should be done on a regular basis to enable the unit to run efficiently.

POST SEASON CLEAN-UP

Once you are finished using the pellet appliance for the season, unplug the stove for added electrical protection. It is very important that the stove be cleaned and serviced as stated above. (See Section Areas of Routine Inspection)

EF-3 BAYI specifications

The Sherwood EF-3 BAYI is a remarkable integrated amplifier that stands out in the realm of audio equipment, delivering exceptional sound quality coupled with advanced technology. Renowned for its robust build and powerful performance, the EF-3 BAYI is designed both for audiophiles and casual listeners looking to elevate their audio experience.

At the heart of the Sherwood EF-3 BAYI is its high-fidelity amplification system, capable of delivering an impressive output power to drive various speaker configurations. The amplifier is engineered to produce a clean, dynamic sound that maintains clarity even at higher volume levels. Its audio performance is enhanced by advanced circuitry that minimizes distortion and ensures a natural, balanced sound across a wide frequency range.

One of the standout features of the EF-3 BAYI is its Class AB amplification technology. This design offers the best of both worlds, combining the efficiency of Class D amplification with the superior sound quality typically associated with Class A designs. This results in an amplifier that not only conserves energy but also offers a warm and engaging listening experience that appeals to critical listeners.

Additionally, the EF-3 BAYI is equipped with multiple input options, including analog RCA inputs, digital coaxial, and optical inputs, allowing users to connect a variety of audio sources. Furthermore, its built-in Bluetooth functionality enables wireless streaming from smartphones, tablets, and other Bluetooth-enabled devices, making it versatile and convenient for modern-day listening habits.

The amplifier's user-friendly interface includes clearly labeled knobs and buttons for adjusting volume, treble, and bass, empowering users to tailor the audio output to their preferences. Moreover, the sleek and contemporary design of the EF-3 BAYI ensures that it fits seamlessly into any home audio setup, making it not just an audio powerhouse but also an aesthetically pleasing addition.

Overall, the Sherwood EF-3 BAYI integrated amplifier exemplifies what modern audio technology can achieve, combining robust performance with advanced features, making it a top choice for anyone looking to enhance their auditory experience. Whether for music, movies, or gaming, the EF-3 BAYI stands ready to deliver exceptional sound quality that truly brings content to life.