Sierra Wireless SIERRA WIRELESS manual Before You Start, Install the Battery, Charge the Battery

Before You Start

Install the Battery

1.Using slight finger pressure, slide the battery compartment cover towards you to remove it.

2.Insert the battery into the battery compartment, making sure the connectors align.

3.Replace the back cover, pressing down gently until the cover clicks into place.

Charge the Battery

1.Plug the micro-USB cable into the device.

2.Plug the other end of the cable into the AC adapter and plug the adapter into an electrical outlet.

3.Charge until the battery charge indicator

shows the battery is fully charged ( ).

Get Ready

1.Make sure you are in an area covered by the Sprint 3G, 4G, or 4G LTE network (not roaming).

2.If you have a LAN connection, disconnect it.

3.Make sure your computer’s Wi-Fi (wireless network connection) mode is turned on.

4.Make sure your device is set up on your Sprint account. (Sign on to your account at sprint.com to verify.)