Get Connected

Power Up the Device

If the device is not powered on, press and hold

the Power button on the front of the device for at least two seconds.

►►The device will automatically activate. You will see “Connect your computer to WiFi network” on the display screen when it’s finished.

Note: It can take several minutes for your device to connect with the Sprint network.

Wirelessly Connect Your Computer

After it’s activated, your Sierra Wireless™ 4G LTE Tri-Fi Hotspot displays the device name and password. You will need this information to connect your Wi-Fi devices to the network.

Note: If your device is WPS-enabled, see Connect WPS-enabled Devices.

1.From your computer, display the Wireless Network Connections window, and then click View Wireless Networks.

2.Select the network name displayed (for example, SprintHotspot12), click Connect, and enter your Wi-Fi password. (To display the

password, press the Navigation button .)

3.Launch your computer’s Web browser.

4.Click The Internet or My Sierra Wireless™ 4G LTE Tri-Fi Hotspot homepage to keep your current settings, or click Set up my Sierra Wireless™ 4G LTE Tri-Fi Hotspot and follow the prompts to customize your setup.