System Works 99101100 manual Pool

Page 5

5.Do not mount electrical controls (on/off switches, timer, etc.) over the filter. You need to be able to stand clear of the filter when starting the pump.

6.Attach the hair and lint pot to the front of the pump. This is an O-ring seal fitting that requires hand tighteningonly.(OVERTIGHTENINGCANRESULTINDAMAGETOTHEO-RINGSEAL)

7.Install the threaded fitting, see Diagram 3 – Figure 1, into the suction port of the pump. This is an O-ring seal fitting that requires hand tightening only. (OVER TIGHTENING CAN RESULT IN DAMAGETOTHEO-RINGSEAL)

8.Install the threaded return fitting into the filter outlet port, see Diagram 3 – Figure 2, making sure that the O-ring is in place in the filter body. Tighten this connection by hand until tight. If water leakage occurs at this connection after installation, adjust connection with a wrench making sure not to exceed 1/4ofaturn.(OVERTIGHTENINGCANRESULTINDAMAGETOTHEFILTER)

9.Connect black hoses to the equipment and the pool with the clamps provided.

a.Connect the skimmer suction port from the pool to the pump inlet.

b.Connect the filter outlet port to the return fitting of the pool, see Figure 1.

c.Install the High Flow™ air relief valve, see Diagram 2 – Detail C, into the top of the filter tank lid. This is an O-ring seal that requires hand tightening only.

d.Install the pressure gauge, see Diagram 2 – Detail D, using the Teflon tape provided. Wrap the threads of the pressure gauge with three layers. Install the gauge into the top of the filter tank until tight.

10.Never install a pump in this system that exceeds the maximum pressure of this filter,

see data label.

11.If using the optional Chlorinator Base, knockout the two slots on the system base with a hammer and screwdriver.

12.Slide the two tabs on the Chlorinator Base into the slots on the system base; see Diagram 4.

Figure 1.

Figure 2.

Skimmer

Return

 

 

POOL

 

To

 

Return

 

Fitting

To

 

Skim-

 

mer

 

Diagram3.

Slots

Tabs

Diagram4.

REV. F 5-1-01

5

P/N 99101100

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Table of Contents Section II. HOW Your Filter Works Section I. Pump Safety InstructionsReadandfollowallinstructions SavetheseinstructionsInstallation Section III. Check Valve Installation InstructionsInlet Section IV. InstallationPool Section V. Initial START-UP and Restart Instructions Section VI. Cleaning the FilterDo not USE a PETROLEUM-BASE Lubricant on the O-RING Section VII. Winterizingthefilter Section VIII. Cleaning the High Flow Manual AIR Relief ValveSection Pump Instructions Section Trouble ShootingTheelectricmotor Replacement Parts Section XI. Technical Data Filter and TankMaxim Pump Dynamo Pump Section XI. Technical Data Dynamo Pump REV. F

99101100 specifications

System Works 99101100 is a comprehensive software suite designed for users seeking an integrated solution for system optimization, maintenance, and productivity enhancements. This all-in-one tool serves as a reliable companion, ensuring that personal computers run at peak performance through a variety of advanced features and technologies.

One of the primary characteristics of System Works 99101100 is its intuitive user interface that simplifies navigation, allowing users of all levels to access the tools they need quickly. The suite includes a powerful disk management utility that optimizes disk performance by defragmenting and reorganizing data on hard drives. This ensures faster data access and improved efficiency, prolonging the lifespan of storage devices.

The suite also incorporates effective virus protection and security features. With built-in antivirus capabilities, System Works 99101100 scans for and eliminates potential threats before they can compromise system integrity. Regular updates ensure that the software remains current with the latest security definitions, giving users peace of mind while browsing the internet or downloading files.

Another noteworthy feature is the system recovery tool, which assists users in restoring their systems to a previous state in case of failure or unwanted changes. This functionality is crucial in today's computing environment, where data loss can occur due to various unforeseen events. System Works 99101100 helps safeguard important files, ensuring that critical data remains recoverable.

In terms of performance tuning, the suite includes tools designed to optimize startup programs, manage system resources, and configure system settings. This level of customization allows users to tailor their computing experience according to their specific needs, enhancing productivity by streamlining workflows.

Additionally, System Works 99101100 is equipped with a detailed reporting system that offers insights into system health and performance benchmarks. Users can track progress over time and make informed decisions about necessary maintenance activities.

In conclusion, System Works 99101100 presents an array of features that focus on enhancing user experience by providing efficient solutions for system maintenance, security, and optimization. Its combination of usability, cutting-edge technology, and comprehensive functionality makes it a standout choice for anyone looking to improve their computing environment. With such a robust toolkit, users can enjoy a seamless and productive experience, free from common technical hindrances.
Top Page Image Contents