Tecumseh OV195EA, OV195XA IV. Before Starting Your Engine, Checking Oil Level, Filling Oil Sump

Page 7

IV. Before Starting Your Engine

A. Checking Oil Level

To avoid engine damage, it is important to:

•Check oil level before each use and every 5 operating hours when engine is warm. Check oil level more frequently during engine break-in.

•Keep oil level between “FULL” and “ADD” marks on dipstick or to point of overflow on engines without dipstick. See Figure 6.

•Be sure oil fill cap/plug is tightened securely.

NOTES

DO NOT overfill oil filler. Doing so may result in oil carry-over to the air cleaner and equipment and cause malfunction or damage.

DO NOT allow oil level to fall below the “ADD” mark on dipstick. Doing so may result in equipment malfunction or damage.

Contact your Authorized TecumsehPower Servicing Dealer for TecumsehPower Oil.

B. Filling Oil Sump

1.Be sure engine is upright and level.

2.Unscrew oil fill cap dipstick from oil filler tube and wipe dipstick clean. See Figure 7.

3.Screw oil fill cap dipstick back into oil filler tube. Tighten securely.

4.Unscrew and remove oil fill cap dipstick from oil filler tube. Note oil level. If oil reading on dipstick is below “ADD” mark, slowly add oil to reach “FULL” level.

See Figure 6.

5.Screw oil fill cap dipstick back into oil filler tube. Tighten securely.

6.Wipe away any spilled oil.

NOTE

To change oil for engine, see "A. Checking and Changing Oil" instructions on page 13.

Fill Between

F ULL “FULL” and “ADD”

Marks

OK

ADD

Figure 6. Engine Oil Level

5

 

4

6

 

9

7

 

 

 

8

 

3

 

 

 

1

2

1.

Spark Plug Cap

2.

Spark Plug Wire

3.

Control Lever (If Equipped)

4.

Fuel Fill Cap

5.

Starter Cord Handle

6.

Oil Fill Cap Dipstick

7.

Muffler Guard

8.

Muffler

9.

Optional Shroud

Figure 7. Engine Components

181-1272-14

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

Page 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OV195EA/OV195XA TecumsehPower Contact Information Safety DefinitionsAvoid Gasoline Fires General Safety PrecautionsAdult Supervision of Operation, Refueling and Maintenance Avoid Carbon Monoxide PoisoningUse Hearing Protection Do not Modify EngineAvoid Burns and Fire from Hot Surfaces Avoid Accidental StartsEngine Identification Decal II. How to Get ServiceTechnician’s Handbook Fuel Component Percentage III. Oil and Fuel SpecificationsOil FuelFill Between ULL Full and ADD Marks IV. Before Starting Your EngineChecking Oil Level Filling Oil SumpFront View Bottom View Filling Fuel TankIf your engine has Go to Starting Your EngineEngines with Electric Starters Primer Bulb OnlyStart/Choke Control Positions II. Choke OnlyTemperatures Below 40F 5C Temperatures Above 40F 5CIII. Primer Bulb and Choke Engines with Recoil Starters Engines with Recoil StartersPrimer Bulb Vent Hole Slow Position RUN Range Fast Position Typical Engine SymbolsVI. Stopping Your Engine and Short-Term Storage VII. MaintenanceChecking and Changing Oil Typical Spark Connection Spark Plug Removing Debris from EnginePaper Filter Slots Flange Tabs Cover Cleaning/Replacing Air CleanerII. Removal and Installation of Air Cleaner Servicing Paper FilterEngine Speed AdjustmentsVIII. Transporting Your Engine CarburetorShort-Term/Seasonal Storage IX. Storing Your EngineExtended Storage II. Oil Cylinder Bore IV. BatteryIII. Oil Preventing Forest, Brush and Grass Fires XI. Maintenance IntervalsMaintenance Intervals ProcedureEvery 25 Hours or 3 Months 1. Change Oil Every 200 Hours or Seasonally 1. Replace Spark Plug Four-Cycle Engine Vertical Crankshaft Air-Cooled Four-Cycle Engine Vertical Crankshaft Air-Cooled Four-Cycle Engine Vertical Crankshaft Air-Cooled Four-Cycle Engine Vertical Crankshaft Air-Cooled Four-Cycle Engine Vertical Crankshaft Air-Cooled California & US EPA Emission Control Warranty Statement Emission Control System Warranty Consumer USE Commercial USE XII. Warranty Information

OV195XA, OV195EA specifications

The Tecumseh OV195XA and OV195EA engines are notable members of Tecumseh's extensive lineup of reliable and efficient power products. Designed primarily for outdoor power equipment, these engines cater to diverse applications including lawn mowers, generators, and other small machinery. Both models are characterized by their compact design, robust performance, and user-friendly features.

One of the standout features of the OV195XA and OV195EA is their powerful 195cc displacement, which delivers a significant amount of torque for heavy-duty applications. The engines are equipped with a reliable overhead valve (OHV) configuration, enabling better combustion efficiency and improved power output. This design not only contributes to higher performance but also leads to enhanced fuel economy, an essential aspect for users looking to maximize efficiency.

These engines also incorporate a lightweight aluminum die-cast crankcase, which reduces overall weight without compromising strength. This material choice provides durability while making the engines easier to handle and install. The dual-element air cleaner enhances the engines' filtration systems, ensuring cleaner air intake and prolonging engine life by minimizing wear and tear.

The Tecumseh OV195XA and OV195EA engines are engineered with a focus on ease of maintenance. They feature an integrated fuel tank, allowing for quick and convenient refueling. Additionally, the side-access oil drain simplifies oil changes, making it easier for operators to maintain the engines without requiring specialized tools.

Another important aspect of these engines is their low vibration and noise levels. Designed with advanced technology that minimizes both sound and vibration, the OV195XA and OV195EA provide a more comfortable user experience, especially during prolonged operation.

In terms of starting, both engines offer easy recoil start mechanisms, ensuring that users can quickly get to work without the hassle of complicated starting procedures.

Overall, the Tecumseh OV195XA and OV195EA engines represent a blend of performance, durability, and user-friendly design. Their innovative features make them suitable for a broad range of applications, ensuring that they can meet the demands of both professional landscapers and DIY enthusiasts alike. With a focus on efficiency and reliability, these engines continue to uphold Tecumseh's legacy as a trusted manufacturer in the small engine market.
Top Page Image Contents