Tecumseh Oil Capacity, Specifications, and Parts Diagram for LV195EA and LV195XA
Page 6

III. Oil and Fuel Specifications

A. Oil

To operate engine you need to use a clean, high quality, detergent oil. For recommended engine oil, see Table 1. In addition, you need to be sure the oil sump contains the correct amount of oil to operate properly.

NOTES

The oil sump capacity is 21 ounces or 1-1/4 U.S. Pints (.62 liters).

Be sure original container is marked A.P.I. Service “SL/SJ”.

Using multigrade oil above 32°F (0°C) will increase oil consumption. SAE 10W40 is NOT recommended.

Special-formulated oils are available at your Authorized TecumsehPower Servicing Dealer.

Table 1. Recommended Oil

TecumsehPower Recommended Oil Usage

Straight Grade

TecumsehPower Part No.

730225A or SAE 30W

Multi Grade

TecumsehPower Part No. 730226A or SAE 5W30 or SAE 10W

TecumsehPower Synthetic Part No.

730263 or SAE 0W30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-20OF

 

 

 

 

 

 

 

 

 

 

20OF

 

32OF

 

 

 

 

 

 

 

60OF

 

 

 

 

80OF

 

 

 

 

 

 

 

 

 

 

 

 

 

0OF

 

 

 

 

 

 

40OF

 

 

 

 

 

 

 

 

 

 

100O F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30OC

 

 

-20OC

 

 

-10OC

 

 

 

 

 

 

 

 

10OC

 

 

20OC

 

 

30OC

 

 

40OC

 

 

 

 

 

 

 

0OC

 

 

 

 

 

 

 

 

 

Table 2. Recommended Fuel

B. Fuel

Use unleaded regular, unleaded premium or reformulated automotive fuel only. You may use gasoline containing the components identified in Table 2.

•DO NOT use leaded fuel.

•Fuel must be fresh and clean. NEVER use fuel left over from last season or stored for long periods.

•NEVER mix oil with fuel.

•DO NOT use fuel containing Methanol (Wood Alcohol).

 

The use of alternative fuels such as E85

CAUTION

or E20 are NOT recommended for use in

 

 

TecumsehPower engines. Alternative fuels with high alcohol content can cause hard starting, poor engine performance, and may cause internal engine damage.

NOTE

Damage and/or performance problems that occur from use of fuels other than those listed in the Operator’s Manuals will not be considered warranty.

IV. Before Starting Your Engine

A. Checking Oil Level

To avoid engine damage, it is important to:

•Check oil level before each use and every 5 operating hours when engine is warm. Check oil level more frequently during engine break-in.

•Keep oil level between “FULL” and “ADD” marks on dipstick or to point of overflow on engines without dipstick. See Figure 6.

•Be sure oil fill cap/plug is tightened securely.

NOTES

DO NOT overfill oil filler. Doing so may result in oil carry-over to the air cleaner and equipment and cause malfunction or damage.

DO NOT allow oil level to fall below the “ADD” mark on dipstick. Doing so may result in equipment malfunction or damage.

Contact your Authorized TecumsehPower Servicing Dealer for TecumsehPower Oil.

Fuel Component

Percentage

 

 

 

 

Ethanol

10%

 

 

Grain Alcohol (“Gasohol”)

10%

 

 

MTBE (Methyl Tertiary Butyl Ether)

15%

 

 

ETBE (Ethyl Tertiary Butyl Ether)

15%

 

 

FULL

Fill Between

 

“FULL” and “ADD”

OK

Marks

 

ADD

Figure 6. Engine Oil Level

Page 4

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

181-1215-14

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LV148EA/LV148XA LV156EA/LV156XA Safety Definitions TecumsehPower Contact InformationAvoid Carbon Monoxide Poisoning General Safety PrecautionsAdult Supervision of Operation, Refueling and Maintenance Avoid Gasoline FiresAvoid Accidental Starts Do not Modify EngineAvoid Burns and Fire from Hot Surfaces Use Hearing ProtectionII. How to Get Service Engine Identification DecalTechnician’s Handbook Oil III. Oil and Fuel SpecificationsIV. Before Starting Your Engine FuelFilling Oil Sump Oil Fill Cap/DipstickII. Oil Fill Cap/Plug Filling Fuel Tank Primer Bulb Only Starting Your EngineEngines with Electric Starters If your engine has Go toSpark Plug Cap Spark Plug Wire Air Cleaner Primer Bulb Carburetor MufflerII. Choke Only Temperatures Above 40F 5C Temperatures Below 40F 5CIII. Primer Bulb and Choke Engines with Recoil Starters Engines with Recoil StartersPrimer Bulb Vent Hole III. Primer Bulb and Choke VII. Maintenance VI. Stopping Your Engine and Short-Term StorageChecking and Changing Oil Draining Oil Sump Typical Spark Plug Connection Oil Drain Plug Locations Oil Fill Plug Spark Plug Cleaning/Replacing Air CleanerRemoving Debris from Engine Servicing Foam FiltersIII. Removal and Installation-Type a Air Cleaner IV. Removal and Installation-Type B Air CleanerII. Servicing Paper Filters Removal and Installation-Type C Air Cleaner VI. Removal and Installation-Type D Air CleanerRetainer Slot Flange Paper Filter Tab Cover Carburetor AdjustmentsVIII. Transporting Your Engine Engine SpeedIX. Storing Your Engine Short-Term/Seasonal StorageDraining Fuel IV. BatteryExtended Storage II. Oil Cylinder BoreProcedure XI. Maintenance IntervalsMaintenance Intervals Preventing Forest, Brush and Grass FiresEvery 25 Hours or 3 Months 1. Clean Foam Filter Every 25 Hours or 3 Months 1. Change Oil Every 200 Hours or Seasonally 1. Replace Spark PlugFour-Cycle Engine Vertical Crankshaft Air-Cooled California & US EPA Emission Control Warranty Statement Emission Control System Warranty XII. Warranty Information Consumer USE Commercial USE

LV195EA, LV156EA, LV156XA, LV195XA specifications

Tecumseh is a well-known player in the field of small engines, and their LV series, including the LV156EA, LV156XA, LV195EA, and LV195XA, showcases their commitment to innovation and reliability. Designed for various applications, these engines are favored in lawn care equipment, utility vehicles, and more.

The LV156EA and LV156XA models feature a robust design, emphasizing durability and ease of use. They are powered by a 4-cycle, single-cylinder layout, which balances power and efficiency. Equipped with an electronic ignition system, these engines ensure quick starts and reliable operation in diverse conditions. The LV156 series typically has a displacement of approximately 156cc, which delivers a commendable power output suitable for light to medium-duty tasks.

On the other hand, the LV195XA and LV195EA models elevate the performance bar with a larger displacement of around 195cc. This additional capacity translates to higher torque and increased power output, making them ideal for more demanding operations. Both models also feature a heavy-duty crankshaft and a cast-iron cylinder liner, ensuring prolonged engine life and superior wear resistance.

A standout feature across the LV series is Tecumseh’s commitment to low emissions and fuel efficiency. The engines integrate advanced combustion technology, optimizing fuel mix for cleaner combustion. This is particularly beneficial for commercial users, as reduced emissions can help meet stringent environmental regulations.

Moreover, Tecumseh's LV series incorporates user-friendly design elements such as an integrated recoil starter and easy-access oil fill, streamlining maintenance tasks. The lightweight construction aids in portability while providing stability during operation.

Overall, the LV156EA, LV156XA, LV195EA, and LV195XA engines from Tecumseh exemplify a blend of innovative technology, robust performance, and environmental responsibility, making them reliable choices for various applications in the small engine market. Whether for residential, commercial, or industrial use, these engines showcase Tecumseh's dedication to quality and performance in the small engine segment.
Top Page Image Contents