OPERATION
CONTROLS
1.Safety Lock – Prevents unintended operation of the machine.
2.Switch Levers – Turns machine on/off.
3.Adjustment Handle – Allows the handle to be adjusted to a comfortable operating position.
1
22
3
NOTE: It is incorrect to make it lock opposite from the way it was assembled by applying more force to the nut.
The pivot pin is off center in relationship to the axis of the handle. To adjust handle, tighten nut on handle while in the locked position. The handle is locked when the screw is to the outside of the machine and the flat on the opposite side of the handle is flush to the bracket.
PIVOT PIN
HANDLE
LOCKING SIDE FLAT
HANDLE HEIGHT ADJUSTMENT
NOTE: The handle is in the up, locked position from the factory.
1
| 3 |
4 | 2 |
|
The handle adjust bar (1) for the polishers are individually preset at the factory for optimum locking efficiency and minimum effort of engaging. It should not be necessary to adjust the handle adjust bar unless the handle adjustment bar (1) the washer (3) and nut (2) have been disturbed.
86309580 FLOOR POLISHER 10/08/08 |